2OM-1075-002.pdf - 第231页

AHB01ESPP *3 Current Mode The current mode of the machine is displayed. There are seven modes - "RUN", "P AUSE", "ST OP", "W AIT", "TEACH", "MOVE", and "TE…

100%1 / 469
AHB01ESPP
1. Outline of "MAINT." Window (Main Menu)
1.1 Composition of Menus for Maintenance
When the [MAINT.] button on the main menu bar is pressed, the "MAINT."
window opens on the touch screen.
Fig. 2F1 "MAINT." Window (Main Menu) (Provided with Multi-Layer Tray Feeder 2)
The tab sheet may look different, depending on which options
are selected.
• Window Composition
*1 Main Menu Bar
The bar can be used commonly for all windows and is provided with
selection buttons for main menus.
*2 Submenu Bar
This bar is treated as part of the "MAINT." window and has the but-
tons to select the submenus.
When a button is selected, the corresponding window (submenu)
opens.
01 12-002 6 - 1
1. Outline of "MAINT." Window (Main Menu)
*4
*5
*6
*7
*1
*2
*3
Note
AHB01ESPP
*3 Current Mode
The current mode of the machine is displayed.
There are seven modes - "RUN", "PAUSE", "STOP", "WAIT",
"TEACH", "MOVE", and "TEST".
*4 Operation Guide
The operating condition and results will be displayed.
*5 Submenu Window
When a button on the submenu bar is pressed, the corresponding
window (submenu) opens.
*6 Tabs
When a submenu window is composed of several sheets, all the
sheets are provided with extensions called "Tabs" and laid on top of
each other so that the tab of each is visible.
When a tab is pressed, the corresponding tab sheet is brought to
the front.
When a submenu window has only one sheet, the sheet is not pro-
vided with a tab.
*7 Status Bar
The status bar at the bottom provides additional information such
as page No., time, etc.
01 12-002 6 - 2
1.1 Composition of Menus for Maintenance
AHB01ESPP
1.1.1 Submenus and Tab Sheets
The menus for maintenance are composed of the following submenus
and tab sheets.
Menus for Maintenance
Submenus Tabs (Tab Sheets) Reference Item Nos.
MNL OPN. Zeroing Opn. (2.1)
Manual Axis Opn. (2.2)
DVC. TEST X/Y Beam Test (3.1)
P.E.C. Recog Test (3.2)
Cmpnt Recog Test (3.3)
UNIT ADJ. Conveyor Adj (4.1)
P.C.B. Transfer Adj. (4.1.1)
PCB Lct Sol Adj (4.1.2)
PCB Xfr Adj (4.1.3)
Feeder Base (4.2)
Nozzle Change (4.3)
Others (4.4)
(To the next page)
Fig. 2F2 Composition of Menus for Maintenance (1)
0308-004 6-3
1.1 Composition of Menus for Maintenance