2OM-1075-002.pdf - 第39页

(2) Stick Components T able 2A1 1 Note: Some components cannot be used due to the mechanical characteristics. Consult our marketing department or sales agency for details. (3) T ray Components T able 2A12 Unit: mm Notes:…

Tape Width: 32 mm Table 2A7

Tape Width: 44 mm Table 2A8

Tape Width: 56 mm Table 2A9

Tape Width: 72 mm Table 2A10

Notes: (a) Some components cannot be used due to the mechani-

cal characteristics and shapes, etc. Consult our mar-

keting department for details.

(b) Use a tape which will fit the reel’s outer diameter of

Max. φ382 mm or less.

ucts made in compliance with our standard).

Consult our marketing department or sales agency for

details.

2. Specifications

0206-003 1-21 AHB01ESPP

(2) Stick Components

Table 2A11

Note: Some components cannot be used due to the mechanical

characteristics. Consult our marketing department or sales

agency for details.

(3) Tray Components

Table 2A12

Unit: mm

Notes: (a) In the case of connectors, up to 100 × 26 mm can be

handled.

(b) Irregular-shaped components can also be used when

an optional device is provided.

cal characteristics. Consult our marketing department

or sales agency for details.

2. Specifications

0206-003 1-22 AHB01ESPP

41. Requirements for Simultaneous Component Picks

(1) Feeders Available for Simultaneous Component Picks

Tape Feeders

Vibratory Stick Feeders

Multi-Layer Tray Feeders

Note: The components from the multi-layer tray feeder can-

not be picked up simultaneously.

(2) Requirements for Simultaneous Picks (Head-to-Head Dis-

tance)

• Simultaneous Component Picks on Same Feeder Base

The feeder-to-feeder pitch for component picks must be

equivalent to more than 6 lanes (feeder slot Nos.).

• Simultaneous Component Picks on Different Feeder

Bases

No condition is required.

• Simultaneous Component Picks on Feeder Base and

Tray

No condition is required.

Note: Some restriction is placed in the Y direction.

2. Specifications

0206-003 1-23 AHB01ESPP