2OM-1075-002.pdf - 第292页

AHB01ESPP 4.1.3 "PCB Xfr Adj" T ab The corresponding tab sheet enables the operator to activate the con- veyor motors. The operator can perform the cycle operations related to the P (P .C.B. positioning section…

100%1 / 469
AHB01ESPP
*2 "Up and Down Control" Group Box
The following buttons are provided in this group box.
The contents of the sheet differ, depending on the button selected in
the "Operation" group box (*1).
Unit Buttons
[Stopper] Button Selected : [P1] and [P2] Buttons and Text
Boxes
[Width near] Button Selected : [YL] and [YR] Buttons and Text
Boxes
[Clamp] Button Selected : [ZL] and [ZR] Buttons and Text
Boxes
Control Buttons
[Stopper] Button Selected : [Upward] and [downward] But-
tons
[Width near] Button Selected : [Clamp ON] and [Clamp OFF]
Buttons
[Clamp] Button Selected : [Clamp ON] and [Clamp OFF]
Buttons
*3 "Time" Group Box
When the [Stopper] button is selected in the "Operation" group box
(*1), the periods of time required for upward and downward move-
ment on the R and L sides is displayed.
When the [Width near] or the [Clamp] button is selected in
the "Operation" group box (*1), the "Time" group box (*3)
disappears.
*4 "Control Sw" Group Box
When the [ENABLE] button on the operation panel is pressed in 2
seconds after some buttons in "*1" and "*2" are selected and the
[ON] button (entitled "MOVE") is pressed, the action corresponding
to the selected buttons takes place.
• Operation Procedure
(1) Select one (to be operated) of the buttons in "*1".
(2) Select one of the unit buttons and press the desired control button
in the "Up and Down Control" group box (*2).
(3) Press the [ON] button (entitled "MOVE"). In 2 seconds, press the
[ENABLE] button on the operation panel.
Note
01 12-002 6-5 9
4.1 "Conveyor Adj" Tab
AHB01ESPP
4.1.3 "PCB Xfr Adj" Tab
The corresponding tab sheet enables the operator to activate the con-
veyor motors.
The operator can perform the cycle operations related to the P (P.C.B.
positioning section), L, and R conveyors.
• Sheet Layout
When the "PCB Xfr Adj" tab is pressed in the "Conveyor Adj" tab sheet,
the following tab sheet appears.
Fig. 2F45 "PCB Xfr Adj" Tab Sheet
• Sheet Composition
*1 "Device Selection" Group Box
The following buttons are provided for cycle operations in this group
box.
[L-Conveyor (+) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the L conveyor moves forward at
high speed.
[L-Conveyor (+) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the L conveyor moves forward at
low speed.
0308-004 6-60
4.1 "Conveyor Adj" Tab
*1
*2
*3
AHB01ESPP
[L-Conveyor (-) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the L conveyor moves backward
at high speed.
[L-Conveyor (-) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the L conveyor moves backward
at low speed.
[P-Conveyor (+) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves forward
at high speed.
[P-Conveyor (+) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves forward
at low speed.
[P-Conveyor (-) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves backward
at high speed.
[P-Conveyor (-) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves backward
at low speed.
[R-Conveyor (+) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the R conveyor moves forward
at high speed.
[R-Conveyor (+) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the R conveyor moves forward
at low speed.
0107-001 6-61
4.1 "Conveyor Adj" Tab