2OM-1075-002.pdf - 第78页

1. Scope Follow the procedure below to perform a program change operation. 2. Preparation for Program Change Operation 2. 1 Preparation for Component Library 2. 2 Creation of Pattern Program for Production Model 2. 3 Reg…

100%1 / 469
0107-001 3-B AHB01ESPP
1. Scope
Follow the procedure below to perform a program change operation.
2. Preparation for Program Change Operation
2.1 Preparation for Component Library
2.2 Creation of Pattern Program for Production Model
2.3 Registration of Pattern Program for Production Model
2.4 Preparation for Nozzles
3. Program Change Operation
3.1 Selection of Current Pattern Program
3.2 Setting of P.C.B. Support Pins
3.3 Conveyor Width Adjustment
3.4 P.C.B. Positioning
3.5 Preparation for Feeders
3.6 P.E.C. Recognition Test
3.7 All Clear Operation of Offset Data "Feeder B"
3.8 Re-Verification of Component Library
(1) Pick-Up Location Teaching Function
(2) Component Recognition Test
4. Confirmation of Component Placement
4.1 Setting of Operation Mode
(1) Confirmation and Setting of Alternate Designation
(2) Confirmation and Setting of Operation Mode Setting
4.2 Component Placement Test
Fig. 2C1
1. Scope
0206-003 3 -1 AHB01ESPP
2. Preparation for Program Change Operation
2.1 Preparation for Component Library
Library data must be created for new components when there is no
component library data required to create a pattern program.
(a) Refer to "Section 3 Component Library" in "Vol. 3: Program-
ming and Machine Data" for how to navigate through the
window.
(b) Refer to another instruction manual "Component Library
(TIM-X Series)" for how to create the data.
2.2 Creation of Pattern Program for Production
Model
A pattern program is required for automatic operation.
Refer to "Section 2 Pattern Programs" in "Vol. 3: Programming and Ma-
chine Data" for details.
2.3 Registration of Pattern Program for Production
Model
The pattern program and the component library data can be sent from
the network terminal (option) to the machine side.
2. Preparation for Program Change Operation
01 12-002 3-2 AHB01ESPP
Note