00195941-03-UM SiplaceCA-EN.pdf - 第247页

User Manual SIPLACE CA 4 Setting Up and Commissioning Edition 08/2011 EN 4.2 Delivery Configuration and Transportation of Placement Machine 247 4 Fig. 4.2 - 2 Delivery configur ation of placement machine (1) Extension ki…

100%1 / 508
4 Setting Up and Commissioning User Manual SIPLACE CA
4.2 Delivery Configuration and Transportation of Placement Machine Edition 08/2011 EN
246
4.2.1.2 Weight of Placement Machine When Ready for Delivery
The following table contains the weight of the placement machine when ready for delivery.
4
4.2.2 Delivery Configuration
The placement machine is delivered with the following configuration:
– The extension kit on the PCB output side (item 1 in fig. 4.2 - 2
) is dismantled and has been
removed from the machine.
– The axis unit (item 2 in fig. 4.2 - 2
) in the extension kit on the PCB output side is placed on a
transportation cushion. All cables are attached to the axis unit.
– The track on the single conveyor is set to a width of 210 mm. On the dual conveyor, the width
of conveyor track 1 is 100 mm and of conveyor track 2 is 210 mm. This width setting is sig-
nificant for fine adjustment of the placement machine.
On the dual conveyor, the electrical plug-in connectors for the conveyor motor and light bar-
rier on the left-hand conveyor track are easily accessible and there is still enough space to fit
the output conveyor.
– The output conveyors (item 4 in fig. 4.2 - 2
) of the single and dual conveyors have been dis-
mantled. The electrical cables to the conveyor motors and light barriers are disconnected.
– Both keyboards (item 6 in fig. 4.2 - 2
) have been disconnected.
– The supporting plates for the keyboards (item 5 in fig. 4.2 - 2
) have been unhooked.
– Both monitors (item 7 in fig. 4.2 - 2
) have been dismantled.
– Both main malfunction displays (item 8 in fig. 4.2 - 2
) have been dismantled.
– All the gantry axes are fixed with shipping braces.
Placement
machin
Dispatch within Europe Dispatch overseas
CA3 3980 kg 4420 kg
CA4 4004 kg 4504 kg
User Manual SIPLACE CA 4 Setting Up and Commissioning
Edition 08/2011 EN 4.2 Delivery Configuration and Transportation of Placement Machine
247
4
Fig. 4.2 - 2 Delivery configuration of placement machine
(1) Extension kit at the PCB-output side - delivered disassembled and dismounted
(2) Axis unit on the PCB output side - CA4: Gantry 2 and 3, CA3: Gantry 3
(3) Transport cover
(4) Output conveyor
(5) Keyboard supporting plate
(6) Keyboard
(7) Monitor
(8) Main fault indicator
(9) Computer unit on the PCB input side
(10)Extension kit at the PCB input side - can be disassembled if necessary
(11) Axis unit at the PCB - input side - CA4 and CA3: gantries 1 and 4
4 Setting Up and Commissioning User Manual SIPLACE CA
4.2 Delivery Configuration and Transportation of Placement Machine Edition 08/2011 EN
248
4.2.3 Transport the Placement Machine in a Transport Crate
4.2.3.1 Services
As a service ASM Assembly Systems GmbH & Co.KG offers you the complete integration of
placement machines of the CA-series in the production line. With our extensive expertise and by
using the right tools and equipment, we can ensure that the installation process runs smoothly and
efficiently. However, this will require you to clarify the infrastructure aspects in advance and make
any necessary changes at your production facility.
Please note that the safest way to transport the placement machine is always in the transport crate
- or at the very least on the pallet. This will prevent serious damage to the placement machine
caused by the feet colliding with obstacles, for example.
4.2.3.2 Safety Instructions
WARNING 4
– The applicable accident prevention regulations concerning the transportation of heavy goods
must be followed.
– If you do not use the fork-lift truck specified in section 4.2.3.3
to transport the placement ma-
chine, you will risk that the machine tips overs.
– In particular, you should wear safety boots to minimize the risk of crushing your feet.
4.2.3.3 Transportation Equipment
To transport the placement machine on the wooden pallet or in the transport crate, use a fork-lift
truck with the following specifications:
Fork length: min. 1800 mm
Carrying power: min. 6000 kg
Clear width between forks: min. 350 mm 4