00195941-03-UM SiplaceCA-EN.pdf - 第32页
1 Introduction User Manual SIPLACE CA 1.10 Abbreviations Edition 08/2011 EN 32 SR Control computer SWS SIPLACE Wafer System TH T winHead VS Vision system WLAN Wireless Local Area Network
User Manual SIPLACE CA 1 Introduction
Edition 08/2011 EN 1.10 Abbreviations
31
1.10 Abbreviations
1
PA Placement area
CO Component
SWS SIPLACE Wafer System
C&P12CA Collect&Place CA head with 12 segments
C&P20CA Collect&Place CA head with 20 segments
C&P6CA Collect&Place CA head with 6 segments
DA Die Attach
DC Dual conveyor
EDIF Energy and data interface
ESD Electrostatically-sensitive group of components
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
SC Single conveyor
FC Flip chip
WT Waffle-pack tray
WTC Waffle tray carrier
GND Ground
IC Integrated circuit
LDU Linear dipping unit
PCB Printed circuit board
SMR Measuring range start
EMR Measuring range end
MMR Measuring range center
MC Machine controller
MTC Matrix Tray Changer
OSC Odd shaped components
P&P Pick&Place
SM Dual conveyor in Single conveyor mode
SMD Surface mounted device
1 Introduction User Manual SIPLACE CA
1.10 Abbreviations Edition 08/2011 EN
32
SR Control computer
SWS SIPLACE Wafer System
TH TwinHead
VS Vision system
WLAN Wireless Local Area Network
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.1 Safety Instructions
33
2 Operational Safety
2.1 Safety Instructions
DANGER
There is a risk for personnel and equipment if the safety instructions are not followed!
Please observe the safety instructions in the relevant User Manual when carrying out work on
the machine. 2
2.1.1 Conventions for the Use of Hazard Symbols
This User Manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
DANGER
as used in this manual means that death, severe injury or considerable damage to equipment
will occur if the danger instructions are not followed. 2
WARNING
as used in this manual means that death, severe injury or considerable damage to equipment
may occur if the warning instructions are not followed. 2
CAUTION
as used in this manual means that slight injury or damage to equipment may occur if the caution
instructions are not followed. 2