00195941-03-UM SiplaceCA-EN.pdf - 第393页
User Manual SIPLACE CA 6 Component and Die Handling Edition 08/2011 EN 6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series 393 6.1.3 Feeder Module Adapter for the X-Series [00141305-xx] Adapter for X…
6 Component and Die Handling User Manual SIPLACE CA
6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series Edition 08/2011 EN
392
6.1.2.9 88 mm X Tape Feeder Module
6
Fig. 6.1 - 13 88 mm X tape feeder module
6
6
6
88 mm X tape feeder module [00141278-xx]
88 mm X tape feeder module with splice sensor [00141298-xx]
Width 105.2 mm
Feeder module locations filled 9
Conveyor increment From 4 mm to 96 mm in 4 mm increments
Changeover time for the component tape < 45 s
Changeover time for the pre-set feeder module
on the machine
< 15 s
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series
393
6.1.3 Feeder Module Adapter for the X-Series
[00141305-xx] Adapter for X series feeders
[00141310-xx] Adapter plate for Siemens label presenter
The spectrum of X tape feeders has been extended to include linear vibration feeders and label
presenters. With an adapter you can convert S linear feeders and label presenters into ones suit-
able for use with the X series component trolley. The adapter performs electronic as well as me-
chanical functions: it converts the communication signals from the S feeder into signals
conforming to the extended X-series protocol. Additional functions, such as feeder module iden-
tification, have also been implemented.
6
Fig. 6.1 - 14 Feeder module adapter for the X-series with label presenter module
(1) Feeder module adapter
(2) Adapter plate for label presenter
(3) Label presenter
NOTE 6
S linear feeders and label presenters can not be configured at the component trolley, if this is in
the accessible range of a 20 segment Collect&Place CA head.
6 Component and Die Handling User Manual SIPLACE CA
6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series Edition 08/2011 EN
394
6
Fig. 6.1 - 15 Feeder module adapter for the X-series with label presenter module
(1) Feeder module adapter
(2) Linear vibratory feeder
An adapter plate is supplied as standard with the adapter for X-series feeder modules:
– The adapter plate should be used for component heights up to 16.5 mm.
– Component heights between 16.5 mm and 25 mm are processed without an adapter
plate.