00195941-03-UM SiplaceCA-EN.pdf - 第410页

6 Component and Die Handling User Manual SIPLACE CA 6.2 Component Trolley, SIPLACE X-Series Edition 08/2011 EN 410 6.2.7 T ape Cont ainer , SIPLACE X Series 6.2.7.1 Description The tape cont ainer can hold reels up to 19…

100%1 / 508
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.2 Component Trolley, SIPLACE X-Series
409
6.2.6 Mount for Additional Tape Reel (X-Series)
6
Fig. 6.2 - 8 Mount for additional Tape Reel (X-Series)
(1) Mount for additional tape reel [00141217-xx]
(2) Mounting device for the support
X-series feeder modules can process component tapes without problems if the lateral offset be-
tween the feeder module and the tape reel does not exceed 60 mm. If a predefined setup means
that the maximum permitted offset cannot be maintained, we recommend that you use the mount
for an additional tape reel (item 1). Simply insert the mount into the holder (item 2) and push it until
the offset is less than the maximum permitted value of 60 mm. The component trolley has 5 hold-
ers in total. Each tape reel mount can hold 2 tape reels, which means that up to ten 15" (381 mm)
reels can be positioned above the tape container.
Max. 60 mm
6 Component and Die Handling User Manual SIPLACE CA
6.2 Component Trolley, SIPLACE X-Series Edition 08/2011 EN
410
6.2.7 Tape Container, SIPLACE X Series
6.2.7.1 Description
The tape container can hold reels up to 19" (483 mm) in diameter. The use of partition plates is
described in section 5.4.5 page 348.
6
Fig. 6.2 - 9 Component trolley, SIPLACE X-series, with tape container
(1) Component trolley
(2) Position of the spindles
(3) Waste bin for unused tape
(4) Tape container
(5) Partition plate
(6) Spindle (enlarged)
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.2 Component Trolley, SIPLACE X-Series
411
6.2.7.2 Maximum Tape Reel Diameter in Relation to the PCB Conveyor Height
6
Note: 6
X-series component trolleys do not generally need spindles. However, if the "Time-out" error
message occurs increasingly on the X feeder module, we recommend that you do use spindles.
Without mount for the
additional tape reel
With mount for the
additional tape reel
PCB Transport
Height of the
Component Trolley
Tape reel diameter Tape reel diameter
without spindle with spindle
830 mm 17" 15" < 15"
900 mm 19" 17" 15"
930 mm 19" 19" 17"
950 mm 19" 19" 19"