00195941-03-UM SiplaceCA-EN.pdf - 第371页
User Manual SIPLACE CA 5 Tasks on the Machine Edition 08/2011 EN 5.12 Docking the Component Trolley In or Out 371 CAUTION 5 The component trolley may on ly be docked into its do cking unit. T ake care when inserting the …
5 Tasks on the Machine User Manual SIPLACE CA
5.12 Docking the Component Trolley In or Out Edition 08/2011 EN
370
WARNING 5
Observe the safety instructions for moving the component trolley in section 2.6.7, page 74.
5.12.3 Docking the X Series Component Trolley
5
Fig. 5.12 - 3 Component trolley and component trolley docking unit, SIPLACE X-series
(1) Component trolley docking unit, SIPLACE X-series
(2) Component trolley, SIPLACE X-series
(3) Locking latches
User Manual SIPLACE CA 5 Tasks on the Machine
Edition 08/2011 EN 5.12 Docking the Component Trolley In or Out
371
CAUTION 5
The component trolley may only be docked into its docking unit. Take care when inserting the
component trolley of the SIPLACE X series machine, so that you do not hit any obstacles with
the locking latches (item 3 in fig. 5.12 - 3).
NOTE 5
Cut the component tapes off flush with the front end of the X feeder modules before you dock in
the component trolley.
CAUTION 5
Check that the placement head is outside the range of the component trolley.
Carefully push the component trolley into machine as far as the stop.
NOTE 5
Close the protective covers since the component trolley can only be docked in if the covers are
closed.
Press the appropriate button on the input or output side of the machine (item 1, 2, 3 or 4 in
fig. 5.12 - 1
until the trolley is completely docked.
Push the sleeves (item 1 in fig. 5.12 - 4) on both handles up and swing the handles down (item
2 in fig. 5.12 - 4
).
5 Tasks on the Machine User Manual SIPLACE CA
5.12 Docking the Component Trolley In or Out Edition 08/2011 EN
372
5
Fig. 5.12 - 4 Component trolley X-series - swivel handles down
(1) Push sleeve up
(2) Fold handle down