00195941-03-UM SiplaceCA-EN.pdf - 第286页

4 Setting Up and Commissioning User Manual SIPLACE CA 4.5 Setting Up the Placement Machine Edition 08/2011 EN 286 4.5.8 Inst all Axis Sli de In at the CA 4 and CA3 4.5.8.1 Axis Unit CA 4 (Gantries 2 and 3) - Electrical C…

100%1 / 508
User Manual SIPLACE CA 4 Setting Up and Commissioning
Edition 08/2011 EN 4.5 Setting Up the Placement Machine
285
4.5.7.7 Installing the Bottom Hand Guard
The placement machines are only supplied with one bottom hand guard. However, if the place-
ment machines are installed in a line, there will be no hand guard between neighboring output and
input conveyors.
WARNING 4
Always fit the bottom hand guard at the input side of the first placement machine and on the out-
put side of the last placement machine in a line [03003432-01] with 4 hexagon socket-head
screws M4x12. This prevents unauthorized access to the inside of the machine.
4
Fig. 4.5 - 11 Fitting the "bottom" hand guard on the PCB output side
(1) Bottom hand guard [03003432-01]
4 Setting Up and Commissioning User Manual SIPLACE CA
4.5 Setting Up the Placement Machine Edition 08/2011 EN
286
4.5.8 Install Axis Slide In at the CA4 and CA3
4.5.8.1 Axis Unit CA4 (Gantries 2 and 3) - Electrical Connection Points
4
Fig. 4.5 - 12 Axis unit CA4 (gantries 2 and 3), rear side - electrical connection points
Plug Plug
Plug
User Manual SIPLACE CA 4 Setting Up and Commissioning
Edition 08/2011 EN 4.5 Setting Up the Placement Machine
287
4.5.8.2 Axis Unit CA4 (Gantries 2 and 3) - Connecting the Plugs
Connect the power cable as shown in the following diagram:
4
4
Check the switch settings of S1
1: ON
2: ON
Axis unit CA4 plugs Connection cable NOTE
Plug Cable
X21 X21
03009782
03009783
03009784
03009785
03009786 W1-W5
Secure connector with clips
X22 X22
03009802
03009803
03009804
03009805
03009807
Secure connector with clips
X01_3sq X4tr 03009780 Snap connector into place
X02_3sq X4tt 03009781 Snap connector into place
X05_3sq X4ur 03009800 Snap connector into place
X06_3sq X4ut 03009801 Snap connector into place
X01_1sq
X02_1sq
X03_1sq
X1to
X3to
X5to
03009791
03009792
03009793
Insert as far as the stop
X04_1sq
X09_1sq
X10_1sq
X1tp
X3tp
X5tp
03009794
03009795
03009796
Insert as far as the stop
X05_1sq
X06_1sq
X07_1sq
X1uo
X3uo
X5uo
03009811
03009812
03009813
Insert as far as the stop
X08_1sq
X11_1sq
X12_1sq
X1up
X3up
X5up
03009814
03009815
03009816
Insert as far as the stop
X30_1sq
X30_2sq
X30_1sq
X30_2sq
03010054
03010054
Screw tightly