00195941-03-UM SiplaceCA-EN.pdf - 第80页
2 Operational Safety User Manual SIPLACE CA 2.7 Safety Instructions for Operating the SWS Edition 08/2011 EN 80 2.7.3 Safety Instructions fo r Closing the Protective Cover W ARNING RISK OF CRUSHING HANDS WHEN CLOSING THE…
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.7 Safety Instructions for Operating the SWS
79
2.7 Safety Instructions for Operating the SWS
2.7.1 Safety Instructions for Working at the Wafer Table
WARNING 2
RISK OF CRUSHING HANDS
Never reach your hands into the gap of the magazine lift in the direction of the wafer table. There
is a risk of being crushed by the gantry or the wafer table.
2.7.2 Safety Instructions for Changing the Wafer Magazines
WARNING 2
HEAVY WAFER MAGAZINE
A full wafer magazine can weigh up to 25 kg. Handle the wafer magazine carefully. Enlist the
help of a second person, if necessary.
CAUTION 2
Make sure that nothing protrudes from the magazine lift.
Make sure, that only the intended wafer magazine is placed properly on the magazine liftplate.
If not handled correctly damage on the wafer magazine i.e. of the magazine lift can not be
excluded.
2 Operational Safety User Manual SIPLACE CA
2.7 Safety Instructions for Operating the SWS Edition 08/2011 EN
80
2.7.3 Safety Instructions for Closing the Protective Cover
WARNING
RISK OF CRUSHING HANDS WHEN CLOSING THE PROTECTIVE HOOD
Always hold the grab recess provided when opening or closing the sliding door.
When closing, do not reach into the gap between the cover or sliding door and the machine
housing. This area is marked with a yellow and black warning strip.
– The sliding door of the SWS can be opened during operation to change the wafer magazine
- the SWS continues to operate. Opening the door only deactivates the magazine lift.
– Opening the cover hood sets the SWS into EMERGENCY OFF state.
2.7.4 Safety Instructions on the Linear Dipping Unit (LDU)
DANGER 2
HAZARDOUS SUBSTANCES (FLUX)
The flux used for the Linear Dipping Unit poses a hazard to health!
Always observe the safety data sheet provided with the flux (Material Safety Datasheet - MSDS)
and make sure that all prescribed measures are fulfilled.
When filling and cleaning the LDU, plus when disposing of the flux, wear the prescribed pro-
tective clothing (e.g. breathing protection, gloves, goggles).
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.8 Safety Equipment
81
2.8 Safety Equipment
2.8.1 Protective Covers
2
Fig. 2.8 - 1 Protective covers and covers
(1) Protective cover
(2) Protective cover
(3) Cover flap and hand guard on the input belt
(4) Cover flap and hand guard on the output belt
(5) Magazine lift with sliding door
(6) Fixed cover on SWS
2
The traveling range of the gantries has two protective covers that can be swung upwards (items
1 and 2). There are side screens to prevent access to the inside of the machine from the side. The
two cover flaps (item 3 and 4) over the input or output belt of the PCB conveyor prevent access
to the PCB conveyor.