00195941-03-UM SiplaceCA-EN.pdf - 第404页
6 Component and Die Handling User Manual SIPLACE CA 6.2 Component Trolley, SIPLACE X-Series Edition 08/2011 EN 404 Between the tape con tainer and the component trolley , there are two 5 mm wide gap s (item 4 in fig. 6.2…
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.2 Component Trolley, SIPLACE X-Series
403
6.2.1 Structure of the Component Trolley SIPLACE X Series
The component trolley essentially consists of the chassis, the component table for holding the
feeder modules, the tape reel container and the waste tape bin.
6
Fig. 6.2 - 3 Component trolley, SIPLACE X-series, front and back view
(1) Chassis
(2) Component table
(3) Tape container
(4) Gap for setup lists
(5) Waste bin for unused tape
(6) Handle
(7) Hand guard
CAUTION 6
Observe the safety instructions in section 2.6.8
, page 75, when you pull the tape reject bin out of
the component trolley.
Assemblies 6
The tape reel container (item 3 in fig. 6.2 - 3) can accommodate tape reels up to a size of 17" (432
mm), in its standard version.
6 Component and Die Handling User Manual SIPLACE CA
6.2 Component Trolley, SIPLACE X-Series Edition 08/2011 EN
404
Between the tape container and the component trolley, there are two 5 mm wide gaps (item 4 in
fig. 6.2 - 3
) - on the left and right - for accommodating setup lists.
The pullout waste tape container (item 5 in fig. 6.2 - 3
). The cut waste tape travel down a channel
into the waste tape bin, which must be emptied as it fills up.
The handles (item 6 in fig. 6.2 - 3
) can be folded out upwards or downwards.
NOTE ON OPERATIONAL SAFETY 6
All component trolleys or matrix tray changers must be docked on the machine in order to oper-
ate it. Fit free locations with dummy feeders, as described in section 2.8.5, page 97.
6.2.2 Technical Data for the SIPLACE X Series Component Trolley
6
6
Length x width 727 mm x 592 mm
to 752 mm x 592 mm with waste bin
Height of the component table 819.5 mm for 830 mm PCB conveyor height
889.5 mm for 900 mm PCB conveyor height
919.5 mm for 930 mm PCB conveyor height
939.5 mm for 950 mm PCB conveyor height
PCB transport height 830 mm ± 15 mm (standard)
900 mm ± 15 mm (option)
930 mm ± 15 mm (option)
950 mm ± 15 mm (SMEMA option)
Height of the folded up handles 969 mm
Number of locations 40 (8 mm X tape feeder module)
Weight
without feeder modules
with feeder modules on all locations
80.4 kg
139.6 kg
Reel diameter
Standard
Maximum
Up to 432 mm (17")
483 mm (19")
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.2 Component Trolley, SIPLACE X-Series
405
6.2.3 Fiducials at the SIPLACE X Series Component Trolleys
6
Fig. 6.2 - 4 Fiducials at the SIPLACE X series component trolleys
(1) Fiducials on the component trolley
Once the SIPLACE X-series component trolley has been docked in, the machine measures the
fiducials on the component trolley.
For components with an edge length of less than 0.5 mm, i.e. 0402 components and smaller, the
position of the component is determined with the tape pocket before the first component is picked
up.