00195941-03-UM SiplaceCA-EN.pdf - 第27页

User Manual SIPLACE CA 1 Introduction Edition 08/2011 EN 1.4 Important Notes on the User Manual 27 1.3.2 SIPLACE on the W orld Wide W eb (WWW) We al so have our own site on the Interne t. Y ou can log on to our SIPLACE h…

1 Introduction User Manual SIPLACE CA

1.3 General Edition 08/2011 EN

1.2.2 Configuration Options of the SWS

The SWS can be integrated into all 4 locations.

NOTE 1

there are two different variants of the SWS. The first variant can be installed at the locations 2

and 4, the second at the locations 1 and 3.

1.3 General

1.3.1 How to Get Information

If you have questions regarding this manual or if you need further inormation on specific topics,

please contact your supervising SIPLACE-branch or us directly at:

ASM GmbH & Co. KG

Rupert-Mayer-Str. 44

D-81379 München 1

SIPLACE customer hotline: (0049) 089 20800 48642 1

E-mail: hotline.siplace@SIPLACE.com. 1

User Manual SIPLACE CA 1 Introduction

Edition 08/2011 EN 1.4 Important Notes on the User Manual

1.3.2 SIPLACE on the World Wide Web (WWW)

We also have our own site on the Internet. You can log on to our SIPLACE homepage under the

address http://www.siplace.com.

The menu navigation and information is available in two languages. Please choose between the

german and english version.

The individual topics provide information about our products, services and contact persons.

Registered customers can also access the SIPLACE User Group. There you can call up special

information on our placement machines, such as

– Technical documentation

– Technical information

– Spare parts lists, etc.

Registering for access to the User Group is sheer child’s play:

 Click on ’Register'

 Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

1.4 Important Notes on the User Manual

1.4.1 Contents and Filing of the User Manual

This user manual contains basic instructions for the assembly, operation and maintenance of the

placement machines. Observe these instructions. The service engineers, qualified staff, operators

and users must therefore read it before commencing installation and commissioning. Make sure

that the manual is always available wherever the placement machine is operated.

1.4.2 Qualification and Training of Personnel

Personnel used for operation, preventive maintenance, inspection and installation must hold the

relevant qualifications for the job. The user must keep tight control over their responsibilities, as-

signment and supervision. Any employee who does not have the relevant training must be trained

and given appropriate instruction. If necessary the user of the machine can have training provided

by the manufacturer/supplier.

In addition, the user must ensure that the employees have fully understood the contents of the

user manual.

1 Introduction User Manual SIPLACE CA

1.5 Hazard Warnings Edition 08/2011 EN

1.4.3 User Classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user:

– Operator

– Line engineer

– Service engineer

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer.

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine.

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating setup configurations, determining vision parameters, etc.

Service engineers 1

This class is reserved for technicians of SIPLACE. These are trained to perform service work,

such as the conversion and subsequent configuration of placement machines.

1.5 Hazard Warnings

WARNING 1

– A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– Please also read chapter 2 of this user manual through carefully.