00195941-03-UM SiplaceCA-EN.pdf - 第384页
6 Component and Die Handling User Manual SIPLACE CA 6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series Edition 0 8/2011 EN 384 6.1.2 T echnical Dat a for the SI PLACE X Series Feeder Modules The fol…
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series
383
6
Fig. 6.1 - 4 Operator panel of the X feeder module
(1) Operator panel of the X feeder module
(2) LCD display
In the basic setting, the track number and conveyor increment are displayed.
(3) "FORWARD" button
(4) "BACK" button
(5) "FOIL" button
(6) "SET" button
(7) Multicolor status display
green ready to operate
orange warning
rot error
off Feeding module is not included in the set up
6
NOTE 6
The machine controller switches off the status display of any feeder modules not included in the
setup. The "LED off" status only occurs when the programming system has preset a job on the
line. This takes some of the work away from the operator since he only has to watch those feeder
modules that are contained in the setup.
For the actual setup process - no setup information at the station, no job sent from SIPLACE Pro
to the station/line - the LED on each feeder module is activated after the setup has been made.
The operator is thus informed whether everything is OK.
6
6 Component and Die Handling User Manual SIPLACE CA
6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series Edition 08/2011 EN
384
6.1.2 Technical Data for the SIPLACE X Series Feeder Modules
The following pages contain pictures of the X-series feeder modules and the technical data.
6.1.2.1 8 mm X Tape Feeder Module
6
Fig. 6.1 - 5 8 mm X tape feeder module
6
8 mm X tape feeder module [00141270-xx]
8 mm X tape feeder module with splice sensor [00141290-xx]
Width 10.8 mm
Feeder module locations filled 1
Conveyor increment 1 mm / 2 mm / 4 mm / 8 mm
Changeover time for the component tape < 45 s
Changeover time for the pre-set feeder module
on the machine
< 15 s
User Manual SIPLACE CA 6 Component and Die Handling
Edition 08/2011 EN 6.1 X Feeder Modules for the Component Trolley from the SIPLACE X Series
385
6.1.2.2 12 mm X Tape Feeder Module
6
Fig. 6.1 - 6 12 mm X tape feeder module
6
6
6
6
6
12 mm X tape feeder module [00141271-xx]
12 mm X tape feeder module with splice sensor [00141291-xx]
Width 22,6 mm
Feeder module locations filled 2
Conveyor increment From 4 mm to 16 mm in 4 mm increments
Changeover time for the component tape < 45 s
Changeover time for the pre-set feeder module
on the machine
< 15 s