00195941-03-UM SiplaceCA-EN.pdf - 第77页
User Manual SIPLACE CA 2 Operational Safety Edition 08/2011 EN 2.6 Safety Instructions for Operating the Placement Machine 77 2.6.10 ESD Machine Safety Only use nozzles that are identified as con ductive. This is the onl…
2 Operational Safety User Manual SIPLACE CA
2.6 Safety Instructions for Operating the Placement Machine Edition 08/2011 EN
76
2.6.9 Risk of Collision Between Reject Container and Component Sensor on the
C&P20 CA Placement Head
If the component or nozzle reject bin is not inserted correctly, this could cause a collision between
the component sensor of the C&P20 CA head and the reject bin. To avoid this risk a new reject
bin was designed for the use at locations without SWS. This reject bin slides safely into the given
position when inserted. The height of the reject bin was also reduced so as to prevent the risk of
collision as far as possible when the bin is not inserted correctly.
To differentiate it, the new reject bin has item number 03003719-06. It can be ordered under this
item number with immediate effect.
2
Fig. 2.6 - 7 New reject bin
NOTE 2
Replace all waste tape bins previously used for the CA series machines with this new reject
bin.
Until this is done, make sure that the existing reject bins are inserted carefully.
The CA series machines may only be operated with the new reject bins [03003719-06].
The old reject bins can, for example, be used for the HF series machines, as these are not
configured with C&P20 CA heads.
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.6 Safety Instructions for Operating the Placement Machine
77
2.6.10 ESD Machine Safety
Only use nozzles that are identified as conductive. This is the only way to meet the requirements
for the ESD safety of the machine.
2.6.11 High Temperatures at the C&P20 CA Placement Heads During Continuous
Operation
2
Fig. 2.6 - 8 High temperatures at the C&P20 CA placement heads during continuous operation
(1) Temperature label [03031926-01]
(2) Housing for the star motor
(3) Handle
2 Operational Safety User Manual SIPLACE CA
2.6 Safety Instructions for Operating the Placement Machine Edition 08/2011 EN
78
CAUTION
HIGH TEMPERATURES 2
The housing of the star motor and the handle on the placement head may become very hot dur-
ing continuous operation and in ambient temperature in excess of 22 °C. Be careful when touch-
ing the parts.
2.6.12 High Temperatures on the X Feeder Modules in Continuous Operation
2
Fig. 2.6 - 9 High temperatures on the X feeder modules in continuous operation
(1) Temperature label [03031926-01]
(2) Stepping motor
CAUTION
HIGH TEMPERATURES 2
The stepping motors can become very hot during continuous operation and in an ambient tem-
perature in excess of 22 °C. Be careful when touching the motors.