00195941-03-UM SiplaceCA-EN.pdf - 第59页
User Manual SIPLACE CA 2 Operational Safety Edition 08/2011 EN 2 .3 Warning Labels on the SWS 59 Fig. 2.3 - 1 Warning label W204 risk of cr ushing at the breakthrough of the side plate
2 Operational Safety User Manual SIPLACE CA
2.3 Warning Labels on the SWS Edition 08/2011 EN
58
2.3 Warning Labels on the SWS
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant
to water and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.2
WARNING 2
– Do not use abrasive cleaners or solvents for cleaning warning labels.
– Replace any damaged or illegible warning labels.
2.3.1 Warning Label W204 on the Wafer Support
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms
and hands.
Do not reach into the running machine
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.3 Warning Labels on the SWS
59
Fig. 2.3 - 1 Warning label W204 risk of crushing at the breakthrough of the side plate
2 Operational Safety User Manual SIPLACE CA
2.3 Warning Labels on the SWS Edition 08/2011 EN
60
2.3.2 Warning Label W201 Safe Operation on the SWS Module
2
2
Fig. 2.3 - 2 W201 [03009338-01] Safe operation of the machine on the SWS module (number per SWS: 1)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely on
the operator being familiar with the user manual and
safety instructions and putting them into effect.