00195941-03-UM SiplaceCA-EN.pdf - 第28页

1 Introduction User Manual SIPLACE CA 1.5 Hazard Warnings Edition 08/2011 EN 28 1.4.3 User Classification The operating sof tware is structured so that ce rtai n functions or menus can only by used or called by appropri …

User Manual SIPLACE CA 1 Introduction

Edition 08/2011 EN 1.4 Important Notes on the User Manual

1.3.2 SIPLACE on the World Wide Web (WWW)

We also have our own site on the Internet. You can log on to our SIPLACE homepage under the

address http://www.siplace.com.

The menu navigation and information is available in two languages. Please choose between the

german and english version.

The individual topics provide information about our products, services and contact persons.

Registered customers can also access the SIPLACE User Group. There you can call up special

information on our placement machines, such as

– Technical documentation

– Technical information

– Spare parts lists, etc.

Registering for access to the User Group is sheer child’s play:

 Click on ’Register'

 Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

1.4 Important Notes on the User Manual

1.4.1 Contents and Filing of the User Manual

This user manual contains basic instructions for the assembly, operation and maintenance of the

placement machines. Observe these instructions. The service engineers, qualified staff, operators

and users must therefore read it before commencing installation and commissioning. Make sure

that the manual is always available wherever the placement machine is operated.

1.4.2 Qualification and Training of Personnel

Personnel used for operation, preventive maintenance, inspection and installation must hold the

relevant qualifications for the job. The user must keep tight control over their responsibilities, as-

signment and supervision. Any employee who does not have the relevant training must be trained

and given appropriate instruction. If necessary the user of the machine can have training provided

by the manufacturer/supplier.

In addition, the user must ensure that the employees have fully understood the contents of the

user manual.

1 Introduction User Manual SIPLACE CA

1.5 Hazard Warnings Edition 08/2011 EN

1.4.3 User Classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user:

– Operator

– Line engineer

– Service engineer

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer.

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine.

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating setup configurations, determining vision parameters, etc.

Service engineers 1

This class is reserved for technicians of SIPLACE. These are trained to perform service work,

such as the conversion and subsequent configuration of placement machines.

1.5 Hazard Warnings

WARNING 1

– A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– Please also read chapter 2 of this user manual through carefully.

User Manual SIPLACE CA 1 Introduction

Edition 08/2011 EN 1.6 Manufacturer/Supplier Warranty/Liability

1.6 Manufacturer/Supplier Warranty/Liability

We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-

ture only and do not contain any contractual conditions or guaranties. All obligationsof the SI-

PLACE result finally from the relevant contract, on whose basis the here described machine has

been left. This applies in particular to all statements regarding performance or service life and the

agreed liability for faults or defects. The provisions of the contract regarding the liability for faults

or defect are neither extended nor restricted by any statements in this user manual.

1.7 Electromagnetic Compatibility (EMC)

SIPLACE placement machines are designed and tested for professional use in industrial applica-

tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed

in any other environment.