JUKI贴片机错误代码.pdf - 第107页

production. [Treatment] Please disable the status of MTC, and press OK button. E501018 “ Component exists on the MTC Shutt le. Please Remove Component fr om Shuttle ” “ MTC 滑梭上存在组件 ， | 请取下组件。 ” [Cause] This error occurs …

100%1 / 464
[Cause]
This error occurs if MTC Home returning has not been complete yet when starting a production.
[Treatment]
OK button : Performs MTC Home returning.
Cancel button : Will have you back to the status that is before pressing START key.
E501013 “MTC is off-line Condition. Please change to on-line”
“MTC 处于脱机状态，|请连接 MTC。”
[Cause]
This error occurs if MTC is Offline when starting a production.
[Treatment]
Please put MTC in online status and press OK button. Pressing Cancel button will have you back to
the status that is before pressing START key.
E501014 “MTC is Door Open Condition. Please Close Cover”
“MTC 的门被打开，|请关上门。”
[Cause]
This error occurs if MTC door is open when starting a production.
[Treatment]
Please close the MTC door then press OK button. Pressing Cancel button will have you back to the
status that is before pressing START key.
E501015 “MTC is Cover Open Condition. Please Close Cover”
“MTC 机盖被打开，|请关闭机盖。”
[Cause]
This error occurs if MTC cover is open when starting a production.
[Treatment]
Please close the MTC cover then press OK button. Pressing Cancel button will have you back to the
status that is before pressing START key.
E501016 “MTC is Error Condition”
“MTC 发生错误。”
[Cause]
This error occurs if MTC is in an error status when starting a production.
[Treatment]
Please turn off the power supply of MTC and examine it.
E501017 “MTC is Change Component Condition. Please Release the Change Condition”
“MTC 处于交换组件状态，|请解除交换状态。”
[Cause]
This error occurs if MTC is in a status where MTC needs a component change when starting a
production.
[Treatment]
Please disable the status of MTC, and press OK button.
E501018 “Component exists on the MTC Shuttle. Please Remove Component from Shuttle”
“MTC 滑梭上存在组件，|请取下组件。”
[Cause]
This error occurs if any components are on the shuttle of MTC when starting a production.
[Treatment]
Please remove those components from the MTC shuttle and press OK button.
E501019 “Because MTC is Change Component Condition, home position return cannot be done. Please
Release the Change condition”
“因 MTC 处于组件交换状态，不能进行返回原点。|请解除组件交换状态。”
[Cause]
This error occurs if MTC is in a status where MTC needs a component change when performing the
Home returning of MTC.
[Treatment]
Please disable the status of MTC, and press OK button.
E501020 “There is no MTC Component in the production program.”
“生产程序内不存在 MTC 组件。”
E501021 “MTC failed to return to the ORIGIN.|Would you like to have MTC return to Home Position?”
“MTC 返回原点失败，|是否重新执行返回原点？”
E501100 “MTS power off”
“MTS 电源被关闭，|请打开电源。”
[Cause]
MTS was not ON when starting a production.
[Treatment]
Please turn on the power supply of MTS and press OK button. Pressing Cancel button will have you
back to the status that is before pressing START key.
E501101 “MTS offline”
“MTS 处于脱机状态。”
[Cause]
MTS was not online when starting a production.
[Treatment]
Please put MTC in online status and press OK button. Pressing Cancel button will have you back to
the status that is before pressing START key.
E501102 “MTS cannot move because of cover opening”
“MTS 不能移动,因为机盖被打开。”
[Cause]
MTS cover was open when starting a production.
[Treatment]
Please close the MTS cover and press OK button. Pressing Cancel button will have you back to the
status that is before pressing START key.
E501103 “The door of MTS opens”
“MTS 的门被打开。”
[Cause]
MTS door was open when starting a production.
[Treatment]
Please close the MTS door and press OK button. Pressing Cancel button will have you back to the
status that is before pressing START key.
E501104 “MTS is Door Open Condition.|Please Close Door”
“MTS 的门被打开，|请关闭门。”
E501105 “MTS is Cover Open Condition.|Please Close Cover”
“MTS 机盖被打开，|请关闭机盖。”
E501106 “MTS is Error Condition”
“MTS 发生错误。”
E501107 “MTS is Change Component Condition.|Please Release the Change Condition”
“MTS 处于组件交换状态，|请解除组件交换状态。”
E501108 “Component exists on the MTS Shuttle.|Please Remove Component from Shuttle”
“MTS 滑梭上存在组件，|请取下组件。”
E501109 “Because MTS is Change Component Condition, |home position return cannot be done.|Please
Release the Change Condition”
“因 MTS 处于组件交换状态，不能进行返回原点。|请解除组件交换状态。”
E501110 “There is no MTS Component in the production program.”
“生产程序内不存在 MTS 组件。”
E501111 “MTS failed to return to the ORIGIN.|Would you like to have MTS return to Home Position?”
“MTS 返回原点失败，|是否重新执行返回原点？”
E501200 “Communication error of DTS occurred”
“DTS 通讯出错。”