JUKI贴片机错误代码.pdf - 第276页
Some program versions are c lashing with each other. [Treatment] Please re-install or version up the applicat ion. Please re-boot your machine. Please contact our technical serv ice dept. for information. E630117 “ Visio…
“图像处理装置错误:|不标准的 NAK 代码。 NAK 的代码是 9。 “
[Cause]
Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630110 “Vision System: A physical error of FLASH occurred”
“图像处理装置错误:|在闪存卡,发生硬件错误 “
[Cause]
Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
[Treatment]
Please change IMGCPUs.
E630111 “Vision System: There is not enough space in FLASH”
“图像处理装置错误:|闪存卡容量不够。 “
[Cause]
Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
Flash memory of VCS is not enough.
[Treatment]
Please change IMGCPUs.
E630112 “Vision system error:| Flash memory system error”
“图像处理装置错误:|因闪存错误引起系统错误。”
E630113 “Vision system error:| Current cabinet is UNTITLED.”
“图像处理装置错误:|当前列表框上没有标题 “
E630114 “Vision system error:| There are several templates with the same ID.”
“图像处理装置错误:|标记数据中存在同样 ID 分配的用户模板数据”
E630115 “Vision system error:| It is unperceived NAK code (NAK 15).”
“图像处理装置错误:|不标准的 NAK 代码。 NAK 的代码是 15”
E630116 “Vision System: It is unprescribed NAK code. NAK16 code”
“图像处理装置错误:|不标准的 NAK 代码。 NAK 的代码是 16”
[Cause]
Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630117 “Vision System: It is unprescribed NAK code. NAK17 code”
“图像处理装置错误:|不标准的 NAK 代码。 NAK 的代码是 17”
[Cause]
Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630118 “Vision System: It is unprescribed NAK code. NAK18 code”
“图像处理装置错误:|不标准的 NAK 代码。 NAK 的代码是 18”
[Cause]
Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630119 “Vision System: It is unprescribed NAK code. NAK19 code”
“图像处理装置错误:|不标准的 NAK 代码。 NAK 的代码是 19”
[Cause]
Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630120 “Vision System: There is no cabinet file”
[Cause]
There is a mistake in the Sequence control in the User defined template.
[Treatment]
Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630121 “Vision System: The cabinet file already exists”
[Cause]
There is a mistake in the Sequence control in the User defined template.
[Treatment]
Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630122 “Vision System: Failed to open the cabinet file”
[Cause]
There is a mistake in the Sequence control in the User defined template.
[Treatment]
Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630123 “Vision System: An error of reading the cabinet file”
[Cause]
There is a mistake in the Sequence control in the User defined template.
[Treatment]
Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630124 “Vision System: An error of writing the cabinet file”
[Cause]
There is a mistake in the Sequence control in the User defined template.
[Treatment]
Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.