JUKI贴片机错误代码.pdf - 第395页
I903011 “ Remove the nozzle from %s .” “ 请取下 %s 上的吸嘴。 ” I903012 “ Set nozzle on %s .” “ 请给 %s 安装吸嘴。 ” I903013 “ Remove the PWB on Convey or .” “ 请取下传送轨道上的基板。 ” I903014 “ The direction of the installat io n of the gauge b…
Q902021 “Current set value will be lost.|Do you interrupt file read ?”
“Current set value will be lost.|Do you interrupt file read ?”
Q902022 “EEPROM will be erased.|Do you interrupt erase EEPROM ?”
“EEPROM will be erased.|Do you interrupt erase EEPROM ?”
Q902031 “Do you measured center of component ?”
“是否运行识别组件中心？”
Q902032 “Do you return jig ?”
“是否归还模具？”
Q902033 “Return CAL piece to CAL piece holder ?”
“是否把校准块(CAL piece)归还到校准块固定器？”
Q902041 “Current version is %s|Would you like to upgrade ?”
“当前VCS版本是%s|是否要升级？”
Q902042 “Current I/O version is %s|Would you like to upgrade ?”
“当前I/O版本是%s|是否要升级？”
Q902043 “Current B/F version is %s|Would you like to upgrade ?”
“当前B/F版本是%s|是否要升级？”
Q902044 “The program data on I/O CPU is deleted.|Would you like to delete the data ?”
“删除I/O CPU程序数据。|是否继续？”
Q902045 “The program data on B/F CPU is deleted.|Would you like to delete the data ?”
“删除B/F CPU程序数据。|是否继续？”
Q902046 “Current MCM/MCMR version is %s|Would you like to upgrade ?”
“当前MCM/MCMR版本是%s|是否要升级？”
Q902047 “Formats the vision system flash memory.| Are you sure you want to format the memory?”
“将格式化图像处理装置的闪存卡。|是否继续？”
Q902050 “ Do you interrupt measurement ?”
“是否停止测量？”
I903001 “Conveyor reference plane has been changed.|An attachment position of units is changed.”
“搬运设计被改变。|变更单元的装配位置。”
I903002 “Component height has been changed.|Design position of Z axis is initialized.”
“组件高度被更新。|初始化Z轴坐标系的设计值。”
I903011 “Remove the nozzle from %s.”
“请取下%s上的吸嘴。”
I903012 “Set nozzle on %s.”
“请给%s安装吸嘴。”
I903013 “Remove the PWB on Conveyor.”
“请取下传送轨道上的基板。”
I903014 “The direction of the installation of the gauge block is different. |Put and substitute it. “
“测量器的安装方向不同。|请调换方向。”
I903015 “Remove the Gauge Block from R1.”
“请取下测量器。”
I903016 “Reboot the system to enable parameters you set. “
“为了有效设定参数，请再启动系统。”
I904001 “Return to home.|Remove jig from CAL block.”
“进行返回原点。|请取下校准块上的模具。”
I904002 “Return to home.(Z axis)”
“进行Z轴返回原点。”
I904003 “Select 'OK' to recognizes 1'st mark of CAL block.|(will return to home first).”
“选择确定按钮，开始运行原点返回后，识别校准块第一标记。”
I904004 “Return to home.(Backup table)”
“进行支撑台返回原点。”
I904005 “Return to home.(AWC)”
“进行AWC返回原点。”
I904006 “Return to home.”
“进行原点返回”
I904121 “File has been read.”
I904122 “File reading process has been interrupted.”
I904123 “EEPROM has been clear.”
I904124 “EEPROM clear process has been interrupted.”
I904011 “It finished to upgrade.”
“版本升级成功。”
I904012 “It failed to upgrade.”
“版本升级失败。”
I904013 “The program data on I/O CPU has successfully been deleted.”
“I/O CPU程序数据删除完毕。”
I904014 “Failed to delete the program data on I/O CPU.”
“删除I/O CPU程序数据失败。”
I904015 “The program data on B/F CPU has successfully been deleted.”
“B/F CPU程序数据删除完毕。”
I904016 “Failed to delete the program data on B/F CPU.”
“删除B/F CPU程序数据失败。”
I904017 “Gauge Block is set on R1.|R1 moves to jig installing position by selecting 'OK'.”
“测量器被安装在R1。|向取下它的位置移动。”
I904030 “Juki vision system is %s.”
“图像处理装置的版本是%s。”
I904040 “Succeeded in the format of the flash memory of Juki vision system. “
“图像处理装置闪存卡的格式化结束。”
I904041 “Failed in the format of the flash memory of Juki vision system. “
“图像处理装置闪存卡的格式化失败。”
E906001 “Memory allocation error”
“内存分配错误。”
[Cause]
The working space can not be saved.
[Treatment]
Please increase some more memory available to save the working space.
E906002 “Shared memory open error”
“打开共享内存错误。”
[Cause]
The shared memory could not be open.
[Treatment]
Please shut down the your machine and re-start it.
E906011 “Measurement result exceeds limit value. Check the MS parameter”
“测量结果超过界限。|请检查一下MS参数。”