JUKI贴片机错误代码.pdf - 第297页
“ 照明图 形结果代码 : 不能保证识别度 “ [Cause] The light is dirty. The camera lens is dirty. The camera cable almo st gets cut off. The light cable almos t gets cut off. The brilliancy of LED is varying. The amount of the electric curr…
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631185 “The template has no features. | Would you like to take the teaching results in?”
“模板自动取得错误:几乎没有特征”
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
E631186”The contrast for the entire image is too low. | Please modify the conditions and teach again”
“ 模板自动取得错误:完全没有特征”
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
Q631200 “The light is getting darker. Please clean the light”
“ 照明图形结果代码:该调整(交换)照明 “
[Cause]
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment]
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631201 “The light is too dark. Please clean the light”
“ 照明图形结果代码:不能保证识别度 “
[Cause]
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment]
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631202 “The light is not ON. Please examine it”
“ 照明图形结果代码:不能识别 “
[Cause]
The camera cable is cut off.
The light cable is cut off.
LED is broken.
The light board is broken.
The camera is broken.
[Treatment]
Please change the camera cables.
Please change the light cables.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
Please change the cameras and re-enter the MS parameter.
E631220 “Terminal component error: Cannot detect a lead (Up side).”
“ 端子组件识别错误:没有引脚（上面） “
E631221 “Terminal component error: Cannot detect a lead (Bottom side).”
“ 端子组件识别错误:没有引脚（下面） “
E631222 “Terminal component error: Cannot detect a lead (Left side).”
“ 端子组件识别错误:没有引脚（左面） “
E631223 “Terminal component error: Cannot detect a lead (Right side).”
“ 端子组件识别错误:没有引脚（右面） “
E631224 “Terminal component error: Wrong lead width (Up side)”
“ 端子组件识别错误:引脚宽度异常（上面） “
E631225 “Terminal component error: Wrong lead width (Bottom side)”
“ 端子组件识别错误:引脚宽度异常（下面） “
E631226 “Terminal component error: Wrong lead width (Left side)”
“端子组件识别错误:引脚宽度异常（左面） “
E631227 “Terminal component error: Wrong lead width (Right side)”
“端子组件识别错误:引脚宽度异常（右面） “
E631228 “Terminal component error: Component detection error”
“端子组件识别错误:测量组件异常 “
E631229 “Terminal component error: Wrong direction”
“端子组件识别错误:组件方向错误 “
E631230 “Terminal component error: Component size is wrong.”
“端子组件识别错误:组件尺寸错误 “
E631240 “All head vision recognize error: Component touches the window frame.”
“ 全部 Head 的组件识别错误:组件处于检测框边缘 “
E631300 “SOT orientation inspection error: SOT inspect unit is dirty.”
“ SOT 方向错误:检查台被弄脏 “
E631301 “SOT orientation inspection error: The range of brightness is too narrow.”
“ SOT 方向错误:亮度等级不明显 “
E631302 “SOT orientation inspection error: The orientation of component is upside down.”
“ SOT 方向错误:方向差 180 度 “
E631303 “SOT orientation inspection error: The orientation of component is different.”
“ SOT 方向错误:方向不同 “
E631500 “Component matching teaching error: Cannot find a characteristic feature.”
“组件示教结果代码:没发现特征 “
E631501 “ Component matching teaching error: Outline trace error”
“ 组件示教结果代码:没发现轮廓 “