JUKI贴片机错误代码.pdf - 第93页

软驱上没有插入软盘 ( 保存生产程序 ) 。 [ 解决 ] 请插入软盘 , 保存生产 程序， 或者选择 [ 另存为 ] 保存到另一个活页夹里。 E500008 “ The file name is not a producti on program created by the machin e.|It is necessary to change in t he file name. Is the file name chan ged…

100%1 / 464
E500003 “File reading error”
”文件读取错误 <%s>“
[Cause]
Failed to read the data from the file.
读文件失败。
1): The name of the file you tried to read from.
1): 文件名
[Treatment]
Please re-install the system.
请重新安装系统。
E500004 “The file can not be displayed <Err No : ?>“
“不能显示文件。|<%d> <错误代码 : %d>“
[Cause]
The wordpad that displays an error or a warning in the production program check prior to a
production can not be displayed.
生产开始前的生产程序检查结果(错误或警告信息)，以写字板形式输出的时候发生错误。
[Treatment]
This is a program error. Please make a note of the cause of the error and the error code, then contact
our technical service Dept. for information.
程序错误。请记录错误代码、错误原因代码，并与代理店或本公司技朮服务部联系。
E500005 “There is no memory enough.”
“内存不足。”
[原因]
因内存不足，没有给程序提供足够的工作领域（内存），或建立窗口失败。
[解决]
请关闭不必要的应用程序，使内存增加。
E500006 “System Error!<%s>“
“系统错误！<%s>“
[原因]
起动应用程序时, 在内部功能模块上发生了错误.
错误内容
[解决]
请记好括 No 内的内容, 并与代理店或本公司技朮服务部取得联系。
E500007 “Program directory(FD) can't be found.|Please insert FD.”
“没有发现生产程序目录(软盘)，|请插入软盘。”
[原因]
软驱上没有插入软盘(保存生产程序)。
[解决]
请插入软盘, 保存生产程序， 或者选择[另存为]保存到另一个活页夹里。
E500008 “The file name is not a production program created by the machine.|It is necessary to change in the
file name. Is the file name changed?”
“生产文件名不是本机器的常规文件名，|需要更改文件名，是否更改？”
[原因]
现在读出来的生产程序不是在本机器上所生成的,所以现在的后缀名上不能覆盖。
[解决]
若选择[是]键，就出现[另存为]对话框，这时候把生产程序的后缀名改为本机器所用的后
缀名后，请保存生产程序。
若选择[否]键则不保存生产程序。
E500100 “Incorrect character has been input”
“输入了非法字符。”
[Cause]
You tried to enter incorrect data.
正要输入非法字符。
[Treatment]
Please re-enter correct data.
请正确输入字符。
E500101 “Input range has been exceeded. | The resumption position of a placement point is set outside of the
possible range”
“超过输入范围，|再开始位置被设置在贴片点范围外。”
[Cause]
The entered resumption position of a placement point exceeded the input range.
[Treatment]
Please enter the value that is under the maximum number of placement points.
E500102 “Input range has been exceeded. | (Input range: %ld - %ld)”
“超过输入范围。|(输入范围: %ld - %ld)”
[Cause]
The input value exceeded the input range.
|The maximum and minimum values of the input range.
[Treatment]
Please enter a value that is within the input range.
E500103 “Input range has been exceeded. |(Input range: %s)”
“超过输入范围。|(输入范围: %s)”
E500104 “Input range has been exceeded. |(Input range: %s)”
“超过输入范围。|(输入范围: %s)”
E500200 “PWB data has not been completed”
“没有完成基板数据。”
[Cause]
The production can not be started since the PWB data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and complete the PWB data.
E500201 “Placement data has not been completed”
”没有完成贴片数据。”
[Cause]
The production can not be started since the Placement data of the Production program that is currently
loaded on the memory is incomplete. However, 'complete' here applies only to the placement data that
will actually be placed (the placement data that will be skipped is not included), and production
programs that are considered as 'incomplete' in the Production Program Editor may become
'complete' in the production.
[Treatment]
Please go to the Production Program Editor and complete the Placement data.
E500202 “Component data has not been completed”
”没有完成组件数据。”
[Cause]
The error is likely to happen when starting a production by pressing the START button on the
operation panel. The production can not be started since the PWB data of the Production program that
is currently loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and complete the PWB data.
E500203 “Pick-up data has not been completed”没有完成吸取数据。”
[Cause]
The production can not be started since the Pick data of the Production program that is currently
loaded on the memory is incomplete. However, 'complete' here applies only to the pick data that will
actually be picked (a pick data which is set to “not use” is not included), and production programs that
are considered as 'incomplete' in the Production Program Editor may become 'complete' in the
production.
[Treatment]
Please go to the Production Program Editor and complete the Pick data.