JUKI贴片机错误代码.pdf - 第174页

E603532 “ Axi s Driver:| RZ1-axis failed motion start .” “ RZ1 轴错误 : 启动失败。 ” E603632 “ Axi s Driver:| RZ2-axis failed motion start .” “ RZ2 轴错误 : 启动失败。 ” E603732 “ Axi s Driver:| RZ3-axis failed motion start .” “ RZ3 轴错误…

100%1 / 464
E603630 “Axis Driver:| XMP error occurred on RZ2-axis.”
“RZ2 轴错误: XMP 错误。”
E603730 “Axis Driver:| XMP error occurred on RZ3-axis.”
“RZ3 轴错误: XMP 错误。”
E603830 “Axis Driver:| XMP error occurred on R4Z-axis.”
“RZ4 轴错误: XMP 错误。”
E603131 “Axis Driver:| Z1-axis status error.”
“ Z1 轴错误: 状态错误。”
E603231 “Axis Driver:| Z2-axis status error.”
“ Z2 轴错误: 状态错误。”
E603331 “Axis Driver:| Z3-axis status error.”
“ Z3 轴错误: 状态错误。”
E603431 “Axis Driver:| Z4-axis status error.”
“ Z4 轴错误: 状态错误。”
E603531 “Axis Driver:| RZ1-axis status error.”
“RZ1 轴错误: 状态错误。”
E603631 “Axis Driver:| RZ2-axis status error.”
“RZ2 轴错误: 状态错误。”
E603731 “Axis Driver:| RZ3-axis status error.”
“RZ3 轴错误: 状态错误。”
E603831 “Axis Driver:| RZ4-axis status error.”
“RZ4 轴错误: 状态错误。”
E603132 “Axis Driver:| Z1-axis failed motion start.”
“ Z1 轴错误: 启动失败。”
E603232 “Axis Driver:| Z2-axis failed motion start.”
“ Z2 轴错误: 启动失败。”
E603332 “Axis Driver:| Z3-axis failed motion start.”
“ Z3 轴错误: 启动失败。”
E603432 “Axis Driver:| Z4-axis failed motion start.”
“ Z4 轴错误: 启动失败。”
E603532 “Axis Driver:| RZ1-axis failed motion start.”
“RZ1 轴错误: 启动失败。”
E603632 “Axis Driver:| RZ2-axis failed motion start.”
“RZ2 轴错误: 启动失败。”
E603732 “Axis Driver:| RZ3-axis failed motion start.”
“RZ3 轴错误: 启动失败。”
E603832 “Axis Driver:| RZ4-axis failed motion start.”
“RZ4 轴错误: 启动失败。”
E603133 “Axis Driver:| Z1-axis failed motion stop.”
“ Z1 轴错误: 停止失败。”
E603233 “Axis Driver:| Z2-axis failed motion stop.”
“ Z2 轴错误: 停止失败。”
E603333 “Axis Driver:| Z3-axis failed motion stop.”
“ Z3 轴错误: 停止失败。”
E603433 “Axis Driver:| Z4-axis failed motion stop.”
“ Z4 轴错误: 停止失败。”
E603533 “Axis Driver:| RZ1-axis failed motion stop.”
“RZ1 轴错误: 停止失败。”
E603633 “Axis Driver:| RZ2-axis failed motion stop.”
“RZ2 轴错误: 停止失败。”
E603733 “Axis Driver:| RZ3-axis failed motion stop.”
“RZ3 轴错误: 停止失败。”
E603833 “Axis Driver:| RZ4-axis failed motion stop.”
“RZ4 轴错误: 停止失败。”
E603136 “Axis Driver:| Z1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ Z1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603236 “Axis Driver:| Z2-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ Z2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603336 “Axis Driver:| Z3-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ Z3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603436 “Axis Driver:| Z4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ Z4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603536 “Axis Driver:| RZ1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603636 “Axis Driver:| RZ2-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603736 “Axis Driver:| RZ3-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603836 “Axis Driver:| RZ4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603138 “Axis Driver:| Z1-axis The position error exceeded the limit.”
“ Z1 轴错误: 位置偏移量超过界限。”
E603238 “Axis Driver:| Z2-axis The position error exceeded the limit.”
“ Z2 轴错误: 位置偏移量超过界限。”
E603338 “Axis Driver:| Z3-axis The position error exceeded the limit.”
“ Z3 轴错误: 位置偏移量超过界限。”
E603438 “Axis Driver:| Z4-axis The position error exceeded the limit.”
“ Z4 轴错误: 位置偏移量超过界限。”
E603538 “Axis Driver:| RZ1-axis The position error exceeded the limit.”
“RZ1 轴错误: 位置偏移量超过界限。”
E603638 “Axis Driver:| RZ2-axis The position error exceeded the limit.”
“RZ2 轴错误: 位置偏移量超过界限。”
E603738 “Axis Driver:| RZ3-axis The position error exceeded the limit.”
“RZ3 轴错误: 位置偏移量超过界限。”