JUKI贴片机错误代码.pdf - 第18页
I109601 “ Returned the command button to default .” “ 返回缺 省值。 ” I109602 “ Failed to return the command button to default .” “ 返回缺 省值失败。 ” E190000 “ A system error occurred. | Load library ” “ 系统错误。 | 加载程序 ” [Cause] Faile…
E109302 “Error has occurred on axis.”
“轴移动发生错误。”
E109303 “Error has occurred during the nozzle presence check.”
“检查吸嘴是否存在时，发生错误。”
Q109330 “Nozzle is set on %s.|Nozzle moves to the place to remove nozzles.”
“吸嘴被装配在%s。|向取下吸嘴位置移动。”
I109350 “Remove the nozzle from %s.”
“请取下在%s 上的吸嘴。”
I109351 “%s will descend.|The feeder bank will have to be down or feeder will have to be detached under the
nozzle.”
“%s 被下降。|或者下降送料器台架，或者卸下吸嘴下面的供给器。”
I109360 “Ms parameter unsetting. | Nozzle existence confirmation is skipped. “
”未设置 MS 参数。|忽略检查吸嘴。”
E109401 “Error occurred in MTC/MTS communication.”
“MTC/MTS 通讯失败。”
E109451 “Failed to upload, because MTC has different program.”
“因为 MTC 生产程序不同，上载失败。”
E109452 “Failed to identify with the required MTC.”
“指定 MTC 没有被连接。”
E109453 “Failed to identify with the required MTC.”
“指定 MTC 没有被连接。”
E109461 “Failed to upload, because MTS has different program.”
“因为 MTS 生产程序不同，上载失败。”
E109462 “Failed to identify with the required MTS.”
“指定 MTS 没有被连接。”
E109463 “Failed to identify with the required MTS.”
“指定 MTS 没有被连接。”
E109500 “Failed in the conveyor initialization.”
“搬运初始化发生错误。”
W109600 “Setting the command button is returned to default . Is it good?”
“是否要命令键设置为缺省值？
I109601 “Returned the command button to default.”
“返回缺省值。”
I109602 “Failed to return the command button to default.”
“返回缺省值失败。”
E190000 “A system error occurred. | Load library”
“系统错误。|加载程序”
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E190001 “A system error occurred. | Find resource”
“系统错误。|查找资源”
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E190002 “A system error occurred. | Load resource”
“系统错误。|加载资源”
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E190003 “A system error occurred”
“系统错误。”
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E190004 “A system error occurred. | Timer acquisition”
“系统错误。|取得时间”
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
W190200 “Nozzle No. %d has not been allocated to ATC.|Allocate nozzle to ATC using ATC nozzle setup
function when machine setup.”
“%d 号吸嘴没有安装在 ATC。|请利用机器设置的 ATC 吸嘴设置，设置吸嘴。”
W190201 “Return to home has not yet been completed.”
“尚未完成返回原点。”
W190202 “Servo is in the free state.”
“伺服处于未使用状态。”
E191000 “A system error occurred. | Load library”
“ 系统错误。|加载程序 “
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.