JUKI贴片机错误代码.pdf - 第256页

E611301 “An error occurred when COMRES response receive. (L1-head)” “ 接受 COMRES 应答出错。 (L1 Head) “ E612301 “An error occurred when COMRES response receive. (L2-head)” “ 接受 COMRES 应答出错。 (L2 Head) “ E613301 “An error occurr…

100%1 / 464
E614093 “The head is equipped with the inaccurate nozzle.|Please confirm the nozzle.
(L4-head)”
“ head 上安装的吸嘴错误。|请检查吸嘴。(L4 Head) “
E615093 “The head is equipped with the inaccurate nozzle.|Please confirm the nozzle.
(R1-head)”
“ head 上安装的吸嘴错误。|请检查吸嘴。(R1 Head) “
E616093 “The head is equipped with the inaccurate nozzle.|Please confirm the nozzle.
(R2-head)”
“ head 上安装的吸嘴错误。|请检查吸嘴。(R2 Head) “
E617093 “The head is equipped with the inaccurate nozzle.|Please confirm the nozzle.
(R3-head)”
“ head 上安装的吸嘴错误。|请检查吸嘴。(R3 Head) “
E618093 “The head is equipped with the inaccurate nozzle.|Please confirm the nozzle.
(R4-head)”
“ head 上安装的吸嘴错误。|请检查吸嘴。(R4 Head) “
E611300 “An error occurred when COMRES command send. (L1-head)”
“ 发送 COMRES 命令出错。(L1 Head) “
E612300 “An error occurred when COMRES command send. (L2-head)”
“ 发送 COMRES 命令出错。(L2 Head) “
E613300 “An error occurred when COMRES command send. (L3-head)”
“ 发送 COMRES 命令出错。(L3Head) “
E614300 “An error occurred when COMRES command send. (L4-head)”
“ 发送 COMRES 命令出错。(L4 Head) “
E615300 “An error occurred when COMRES command send. (R1-head)”
“ 发送 COMRES 命令出错。(R1 Head) “
E616300 “An error occurred when COMRES command send. (R2-head)”
“ 发送 COMRES 命令出错。(R2 Head) “
E617300 “An error occurred when COMRES command send. (R3-head)”
“ 发送 COMRES 命令出错。(R3 Head) “
E618300 “An error occurred when COMRES command send. (R4-head)”
“ 发送 COMRES 命令出错。(R4Head) “
E611301 “An error occurred when COMRES response receive. (L1-head)”
“ 接受 COMRES 应答出错。(L1 Head) “
E612301 “An error occurred when COMRES response receive. (L2-head)”
“ 接受 COMRES 应答出错。(L2 Head) “
E613301 “An error occurred when COMRES response receive. (L3-head)”
“ 接受 COMRES 应答出错。(L3 Head) “
E614301 “An error occurred when COMRES response receive. (L4-head)”
“ 接受 COMRES 应答出错。(L4 Head) “
E615301 “An error occurred when COMRES response receive. (R1-head)”
“ 接受 COMRES 应答出错。(R1 Head) “
E616301 “An error occurred when COMRES response receive. (R2-head)”
“ 接受 COMRES 应答出错。(R2 Head) “
E617301 “An error occurred when COMRES response receive. (R3-head)”
“ 接受 COMRES 应答出错。(R3ead) “
E618301 “An error occurred when COMRES response receive. (R4-head) “
“ 接受 COMRES 应答出错。(R4 Head) “
第六章 异步
[异步、图像、球识别、外形引脚测量、MTC、MTS、MTD]
E620001”Emergency stop.”
“被紧急停止。”
[原因]
主机的<紧急停止>按钮被按下。
[解决]
请释放主机的<紧急停止>。
E620002 “Cover opened.”
“机盖被打开。”
[原因]
主机的机盖被开着的状态。
[解决]
以慢速移动时，请注意安全等。
以快速移动时，请关上机盖。
E620003 “Area sensor perceived.”
“发现超出范围。”
[原因]
因某种理由范围传感器起作用而引起错误。
[解决]
请解除范围传感器起作用的原因。
E620004 “Feeder sensor detected.”
“发现传送带浮动。”
[原因]
因某种理由传送带浮动传感器起作用而引起错误。
[解决]
请解除传送带浮动传感器起作用的原因。
E620005 “X limit sensor perceived.”
“X 轴移动超出界限。”
[原因]
如果 X 轴的界限传感器上面有轴时，就显示此信息。
[解决]
从界限传感器上，用手动移动轴之后，请按[确定]键。
E620006 “Xr limit sensor perceived.”
“右 X 轴移动超出界限。”
[原因]
如果右 X 轴的界限传感器上面有轴时，就显示此信息。
[解决]
从界限传感器上，用手动移动轴之后，请按[确定]键。
E620007 “Y limit sensor perceived.”
“Y 轴移动超出界限。”
[原因]
如果 Y 轴的界限传感器上面有轴时，就显示此信息。
[解决]
从界限传感器上，用手动移动轴之后，请按[确定]键。
E620008 “Yc limit sensor perceived.”
“Yc 轴移动超出界限。”
[原因]
如果 Yc 轴的界限传感器上面有轴时，就显示此信息。
[解决]
从界限传感器上用手动移动轴之后，请按[确定]键。