JUKI贴片机错误代码.pdf - 第406页
[Cause] Appears if the MSL setup is started concurrently. [Deal] Restart th e process after ex iting from the M SL setup. E1022 “ Optimization processing start-up fail ed. “ " 优化处理激活失败。 " [Cause] Memory space i…
"发生一个接收错误。 <位置 ID = %d。 <Reception status = %s>"
E1012 “Memory was insufficient at time of reception. <Station ID = %d Reception status = %s> “
"接收时内存不足。 <位置 ID = %d.3。 <Reception status = %s>"
E1013 “INI file read-in failed. “
"读入 INI 文件失败。"
[Cause]
Appears if the required no line is set during the MSL setup.
[Deal]
Make sure again that the required line is set during the MSL setup.
E1014 “Profile read-in failed. “
"读入剖面失败。"
E1015 “Timer used for communication has not been set. “
"为信息通讯使用的定时器没有设置."
E1016 “File creation at time of data reception failed. “
"接受数据时创建文件失败。"
E1017 “Station is not in condition to transmit. <Station ID = %d> “
"所在位置没有条件被传送。 <位置 ID = %d>"
E1018 “A status error has occurred. “
"发现一个位置错误。."
E1019 “Input is incorrect. “
"输入错误。"
[Cause]
Invalid values or symbols for the range is specified.
[Deal]
Enter valid value or symbols for the item.
E1020
“Memory cannot be secured. “
"不能保护内存。"
[Cause]
Allocating memory was failed.
[Deal]
Retry the task after exiting from unnecessary applications.
E1021 “Start-up cannot be done at same time as MSL setup. “
"当设置 EPU 时不能激活。"
[Cause]
Appears if the MSL setup is started concurrently.
[Deal]
Restart the process after exiting from the MSL setup.
E1022 “Optimization processing start-up failed. “
"优化处理激活失败。"
[Cause]
Memory space is not sufficient.
[Deal]
Quit other running applications, then restart it.
E1023 “Window class registration failed. “
"分类窗口注册失败。"
E1024 “Layout display window creation failed. “
"规划显示窗口的创建失败。"
E1025 “Printing in another EXE is presently in progress, so printing cannot be done. “
"正在进行另一个 EXE 中的打印，打印不能进行。"
[Cause]
Whenever another application is printing a job, printing from the "Program Edit" function is
unavailable.
[Deal]
Restart printing after the application has completed its printing job.
E1026 “Illegal line configuration.Setup line configuration. “
"不合规定的线结构。< 设置线结构。"
[Cause]
No station was designated for the active line during the MSL setup.
[Deal]
Designate a station for the active line during the MSL setup.
E1223 This program has been producing.
[Cause]
The specified production program file is in production.
[Deal]
After completing the production, reload the file.
E1224 This program is reserved or suspended.
[Cause]
The specified production program file is reserved for production, but has not been produced or in
post-processing.
[Deal]
Selecting "Yes" opens the specified program file, enabling you to edit it, however, the reserved
production program file becomes unavailable for production. Selecting "No" returns the system to the
file loading process. Selecting "Cancel" discards the loading process.
E1234 Help initialization failed. Help function is not available.
[Cause]
You can select the output format.
[Deal]
Quit other running application running, then restart it.
W1501 <%s> already exists.Shall it be overwritten?
"已经存在,确定要覆盖吗？"
[Explanation]
Appears if naming and saving an existing program file is tried.
W1502 ata being created will be lost . Is it all right to terminate Windows?
"已经创建的数据将被丢失。要终止窗口吗？"
[Explanation]
Appears if exiting from Windows is tried without saving a program file which has been modified.
E2001 “Password is incorrect. “
"密码不正确。"
E2002 “MSL setup has already been started up. “
"EPU 的设置已经被激活。"
E2003 “File write-in failed. “
"写入文件失败。"
E2004 “Network ID specification is incorrect. “
"网络 ID 规格不正确。"
E2005 “MSL setup cannot be started up at the same time as other processing. “
"处理其它时不能同时激活 EPU 设置。"
E2006 “Arc net driver has not been started up. “
"还未激活弧型网络驱动程序。
"
E2007 “Station type has not been set. “
"没有设置位置类型。"