JUKI贴片机错误代码.pdf - 第137页
“ 打开程序管理命令失败。 ” [Cause] The software did not g et started properly. [Treatment] Please turn off the power supply of t he machine and reboot it. E511005 “ Failed in t he transmission of the response to the application-m a…
“IC 回收器被装满。|请卸下组件。”
[Cause]
Although the IC collection belt is selected in the 'Component reject to' in the Component data, the
component cannot be returned since the IC collection belt is full.
[Treatment]
Please hit the OK button.
Also, if you want to use the IC collection belt, please remove the component.
W510402 “There is no semiauto-trash box.|Please set.”
“半自动废弃盒不存在。|请安装半自动废弃盒。”
I510801 “It is temporary stop by the part protection. | Please detach parts”
“为保护组件实施暂停。|请取下组件。”
[Cause]
'Protect' is selected in the 'Component reject to' in the Component data.
[Treatment]
Please remove the component manually and hit the OK button.
E511001 “It is packet making error”
“建立信息包发生错误。”
[Cause]
Failed to create a Production movement packet.
[Treatment]
Please contact our technical service dept. for information.
E511002 “The command error occurred”
“命令错误。”
[Cause]
An UN-recognizable command was issued.
[Treatment]
A wrong version has been installed.
Please install the latest software.
E511003 “Failed in create of the command of a sub-scheduler”
“创建次调度程序命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511004 “Failed in the opening of the command of the application-manager”
“打开程序管理命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511005 “Failed in the transmission of the response to the application-manager”
“往程序管理发送应答失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511006 “Failed in the reception of the command from the application-manager”
“接收程序管理的命令失败。
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511007 “Failed in the opening of the command of the scheduler”
“打开调度程序命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511008 “Failed in the transmission of the response to the scheduler”
“往调度程序发送应答失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511009 “Failed in the reception of the command from the scheduler”
“接收调度程序的命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E512000 “ Axis Alarm |(Detail Error is unknown)”
“坐标轴警报 |(不能查出详细错误)”
E512111 “XY Axis detect Servo Driver Alarm|(OverCurrent)”
“XY 轴移动时伺服驱动警报|(过电流)”
E512112 “XY Axis detect Servo Driver Alarm|(OverLoad)”
“XY 轴移动时伺服驱动警报|(过负荷)”
E512113 “XY Axis detect Servo Driver Alarm|(OverVoltage)”
“XY 轴移动时伺服驱动警报|(过电压)”
E512114 “XY Axis detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“XY 轴移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512115 “XY Axis detect Servo Driver Alarm|(OverHeat Error)”
“XY 轴移动时伺服驱动警报|(过热错误)”
E512116 “XY Axis detect Servo Driver Alarm|(Encoder Error or Magnet Scale Error)”
“XY 轴移动时伺服驱动警报|(译码器异常或 Magnet 刻度出错)”
E512117 “XY Axis detect Servo Driver Alarm|(Commutation Error)”
“XY 轴移动时伺服驱动警报|(通讯异常)”
E512118 “XY Axis detect Limit Senser”
“XY 轴移动时界限错误”
E512119 “XY Axis detect Cordinates outof Limit Range”
“XY 轴移动前指定的坐标，超过移动范围。”
E512211 “XR Axis detect Servo Driver Alarm|(OverCurrent)”
“XR 轴移动时伺服驱动警报|(过电流)”
E512212 “XR Axis detect Servo Driver Alarm|(OverLoad)”
“XR 轴移动时伺服驱动警报|(过负荷)”
E512213 “XR Axis detect Servo Driver Alarm|(OverVoltage)”
“XR 轴移动时伺服驱动警报|(过电压)”
E512214 “XR Axis detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“XR 轴移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512215 “XR Axis detect Servo Driver Alarm|(OverHeat Error)”
“XR 轴移动时伺服驱动警报|(过热错误)”