JUKI贴片机错误代码.pdf - 第307页
I640183 “ MTC : Drawing Parts Cancel by Pressi ng MTC Emergency Switch .” “ MTC : 取组件的要求 ，因状态转为紧急停止而被取消 ” I640184 “ MTC : Drawing Parts In terrupt by Retry Out .” “ MTC : 取组件的要求，因状态转为重试而被退出 ” I640185 “ MTC : Drawing Part…
“MTC 系统错误(E117) : 滑梭打开/关闭传感器发生错误”
E640120 “MTC SYSTEM ERROR (E120) : Drive Time Out (Z Axis).”
“MTC 系统错误(E120) : 驱动超时(Z 轴)”
E640121 “MTC SYSTEM ERROR (E121) : Driver Alarm (X Axis).”
“MTC 系统错误(E121) : 驱动警报(X 轴)”
E640122 “MTC SYSTEM ERROR (E122) : Driver Alarm (Y Axis).”
“MTC 系统错误(E122) : 驱动警报(Y 轴)”
E640124 “MTC SYSTEM ERROR (E124) : Driver Alarm (Shuttle).”
“MTC 系统错误(E124) : 驱动警报(滑梭)”
E640127 “MTC SYSTEM ERROR (E127) : Tray Error.”
“MTC 系统错误(E127) : 托盘错误”
E640130 “MTC SYSTEM ERROR (E130) : Position Error (Z Axis).”
“MTC 系统错误(E130) : 位置错误”
E640134 “MTC SYSTEM ERROR (E134) : Changing Shuttle Pad Error.”
“MTC 系统错误(E134) : 更换滑梭垫发生错误”
E640140 “MTC SYSTEM ERROR (E140) : Unable to Change Servo Driver ON (Z Axis).”
“MTC 系统错误(E140) : 不能起动伺服驱动器(Z 轴)”
E640144 “MTC SYSTEM ERROR (E144) : Software Limit (Shuttle).”
“MTC 系统错误(E144) : 软件界限(滑梭)”
E640150 “MTC SYSTEM ERROR (E150) : Servo Alarm.”
“MTC 系统错误(E150) : 伺服警告”
E640164 “MTC SYSTEM ERROR (E164) : Bulb Error.”
“MTC 系统错误(E164) : Bulb 错误”
I640170 “MTC : Drawing Parts Cancel by parts request cancellation.”
“MTC : 取组件的要求，因状态转为取消而被取消”
I640181 “MTC : Drawing Parts Cancel by Switching Off-line.”
“MTC : 取组件的要求，因状态转为脱机而被取消”
I640182 “MTC : Drawing Parts Cancel by Switching Supply.”
“MTC : 取组件的要求，因状态转为补充而被取消”
I640183 “MTC : Drawing Parts Cancel by Pressing MTC Emergency Switch.”
“MTC : 取组件的要求，因状态转为紧急停止而被取消”
I640184 “MTC : Drawing Parts Interrupt by Retry Out.”
“MTC : 取组件的要求，因状态转为重试而被退出”
I640185 “MTC : Drawing Parts Interrupt by Empty Parts.”
“MTC : 取组件的要求，因无组件而被退出”
I640186 “MTC : Drawing Parts Interrupt by Supply.”
“MTC : 取组件的要求，因补充操作中而被退出”
E640202 “MTC COMMUNICATION ERROR : Data Error.”
“MTC 通讯错误 : 数据错误”
E640203 “MTC COMMUNICATION ERROR : Communication Error.”
“MTC 通讯错误 : 通讯错误”
E640204 “MTC COMMUNICATION ERROR : Procedure Error.”
“MTC 通讯错误 : 步骤错误”
E640205 “MTC COMMUNICATION ERROR : Synchronous Error.”
“MTC 通讯错误 : 同步错误”
E640206 “MTC COMMUNICATION ERROR : Power Off.”
“MTC 通讯错误 : 停电错误”
E640207 “MTC DATA ERROR : Step Number of Tray is Wrong.”
“MTC 数据错误 : 托盘阶层号指定错误”
E640208 “MTC ERROR : MTC is not Available in Setup Data.”
“MTC 错误 : MTC没有被设置”
E640209 “MTC DATA ERROR : Not Finding STX, ETX.”
“MTC 数据错误 : 没有发现正文开始符(STX), 结束符(ETX)”
E640210 “MTC DATA ERROR : Undefined Command Code is Specified.”
“MTC 数据错误 : 指定了未定义指令代码”
E640211 “MTC ERROR : Parts Request Send Multiplexy (WAIT).”
“MTC 错误 : 抽出要求被多重发送(WAIT)”
E640212 “MTC ERROR : Parts Request Send Multiplexy (KICK).”
“MTC 错误 : 抽出要求被多重发送(KICK)”
E640213 “MTC ERROR : Parts Request is Abnormal.”
“MTC 错误 : 抽出要求异常”
E640214 “MTC ERROR : Response Time Out.”
“MTC 错误 : 应答超时”
E640217 “MTC ERROR : MTC Initialize Incompletely.”
“MTC 错误 : 没有运行 MTC 初始化”
E640218 “MTC ERROR : MTC can't Moving when Off-line.”
“MTC 错误 : 在脱机状态下，MTC 不能运转”
E640219 “MTC ERROR : MTC can't Moving when Pneumatic Pressure has Dropped.”
“MTC 错误 : 因空气压下降，不能运转 MTC”
E640220 “MTC ENTRY FUNCTION ERROR : IPC Object Open Error (MTC-1).”
“MTC 登录函数错误 : 打开 IPC 对象发生错误(MTC-1)”
E640221 “MTC ENTRY FUNCTION ERROR : IPC Object Open Error (MTC-2).”
“MTC 登录函数错误 : 打开 IPC 对象发生错误(MTC-2)”
E640222 “MTC ENTRY FUNCTION ERROR : IPC Object Open Error (MTS-1).”
“MTC 登录函数错误 : 打开 IPC 对象发生错误(MTS-1)”
E640223 “MTC ENTRY FUNCTION ERROR : IPC Object Open Error (MTS-2).”
“MTC 登录函数错误 : 打开 IPC 对象发生错误(MTS-2)”
E640224 “MTC ENTRY FUNCTION ERROR : IPC Object Open Error (DTS-1).”
“MTC 登录函数错误 : 打开 IPC 对象发生错误(DTS-1)”
E640225 “MTC ENTRY FUNCTION ERROR : IPC Object Open Error (DTS-2).”
“MTC 登录函数错误 : 打开 IPC 对象发生错误(DTS-2)”
E640230 “MTC ENTRY FUNCTION ERROR : IPC Object Close Error (MTC-1).”
“MTC 登录函数错误 : 关闭 IPC 对象发生错误(MTC-1)”
E640231 “MTC ENTRY FUNCTION ERROR : IPC Object Close Error (MTC-2).”
“MTC 登录函数错误 : 关闭 IPC 对象发生错误(MTC-2)”
E640232 “MTC ENTRY FUNCTION ERROR : IPC Object Close Error (MTS-1).”
“MTC 登录函数错误 : 关闭 IPC 对象发生错误(MTS-1)”
E640233 “MTC ENTRY FUNCTION ERROR : IPC Object Close Error (MTS-2).”