JUKI贴片机错误代码.pdf - 第251页
“ 吸嘴长度过长。 | 请检查吸嘴。 (R1 Head) “ E616080 “The nozzle is long and length is too lo ng.|Please confirm the nozzle. (R2-head)” “ 吸嘴长度过长。 | 请检查吸嘴。 (R2 Head) “ E617080 “The nozzle is long and length is too lo ng.|Please confirm…
“ 吸嘴长度过长。|请检查吸嘴。(R2 Head) “
E617078 “The length of the nozzle is too long.|Please confirm the nozzle. (R3-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R3 Head) “
E618078 “The length of the nozzle is too long.|Please confirm the nozzle. (R4-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R4 Head) “
E611079 “The length of the nozzle is too short.|Please confirm the nozzle. (L1-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L1 Head) “
E612079 “The length of the nozzle is too short.|Please confirm the nozzle. (L2-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L2 Head) “
E613079 “The length of the nozzle is too short.|Please confirm the nozzle. (L3-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L3 Head) “
E614079 “The length of the nozzle is too short.|Please confirm the nozzle. (L4-head)”
“ 吸嘴长度过短。|请检查吸嘴。(L4 Head) “
E615079 “The length of the nozzle is too short.|Please confirm the nozzle. (R1-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R1 Head) “
E616079 “The length of the nozzle is too short.|Please confirm the nozzle. (R2-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R2 Head) “
E617079 “The length of the nozzle is too short.|Please confirm the nozzle. (R3-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R3 Head) “
E618079 “The length of the nozzle is too short.|Please confirm the nozzle. (R4-head)”
“ 吸嘴长度过短。|请检查吸嘴。(R4 Head) “
E611080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L1-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L1 Head) “
E612080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L2-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L2 Head) “
E613080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L3-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L3 Head) “
E614080 “The nozzle is long and length is too long.|Please confirm the nozzle. (L4-head)”
“ 吸嘴长度过长。|请检查吸嘴。(L4 Head) “
E615080 “The nozzle is long and length is too long.|Please confirm the nozzle. (R1-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R1 Head) “
E616080 “The nozzle is long and length is too long.|Please confirm the nozzle. (R2-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R2 Head) “
E617080 “The nozzle is long and length is too long.|Please confirm the nozzle. (R3-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R3 Head) “
E618080 “The nozzle is long and length is too long.|Please confirm the nozzle. (R4-head)”
“ 吸嘴长度过长。|请检查吸嘴。(R4 Head) “
E611081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(L1-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(L1 Head) “
E612081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(L2-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(L2 Head) “
E613081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(L3-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(L3 Head) “
E614081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(L4-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(L4 Head) “
E615081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(R1-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(R1Head) “
E616081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(R2-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(R2Head) “
E617081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(R3-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(R3Head) “
E618081 “The length of the measured nozzle exceeds tolerance.|Please confirm the nozzle.
(R4-head)”
“ 吸嘴长度的测量结果超过允许范围。|请检查吸嘴。(R4 Head) “
E611082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(L1-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(L1 Head) “
E612082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(L2-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(L2 Head) “
E613082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(L3-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(L3 Head) “
E614082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(L4-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(L4 Head) “
E615082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(R1-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(R1 Head) “
E616082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(R2-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(R2 Head) “
E617082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(R3-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(R3 Head) “
E618082 “The length of the measured nozzle does not fill tolerance.|Please confirm the nozzle.
(R4-head)”
“ 吸嘴长度的测量结果没有达到允许范围。|请检查吸嘴。(R4 Head) “
E611084 “A vacuum goes up too much. The nozzle may be choked up.|Please confirm the
nozzle. (L1-head)”
“ 真空过大。可能吸嘴被塞满。|请检查吸嘴。(L1- Head) “
E612084 “A vacuum goes up too much. The nozzle may be choked up.|Please confirm the
nozzle. (L2-head)”
“ 真空过大。可能吸嘴被塞满。|请检查吸嘴。(L2- Head) “
E613084 “A vacuum goes up too much. The nozzle may be choked up.|Please confirm the
nozzle. (L3-head)”
“ 真空过大。可能吸嘴被塞满。|请检查吸嘴。(L3- Head) “