JUKI贴片机错误代码.pdf - 第423页
"<%s> 将被命名，确定吗？ " [Explanation] Appears if a resource is selecte d from the datab ase list access . W3509 “ Pick data will become in valid.Is th is OK? “ " 挑选的数据将无效，确定吗？ " W3510 Select data to b…
Retrieve a database listing call for a name of a part not present on the program editing.
E3057 “This component name <%s> already exists. “
"该组件名已存在。"
E3058 “This adhesive patten name <%s> already exists. “
"该粘性图案名 <%s>已经存在。"
E3059 “Adhesive database file cannot be found. “
"找不到粘性数据库文件。"
W3060 “The database structure has been changed. Unless this file is updated. It cannot be handled in this
version. Launch Database, dialogbox will show how to update the database structure. “
"数据库结构已经被改变，文件将更新。在该版本中不能处理，激活数据库，对话框将显
示如何更新数据库结构。"
W3501 “A file already exists.Shall it be overwritten? “
"文件已经存在，要覆盖吗？"
W3502 Data being created will be lost. Is this OK?
"创建的数据将丢失，确定吗?"
[Explanation]
Appears if "New" or "Open" is selected from the File menu when editing data.
W3503 When station is changed, component data and pick data will be deleted. Is this OK?
"当位置被改变，组件数据和挑选数据将被删除，确定吗？"
[Explanation]
Appears if station specification is changed in the mounting data.
W3504 There are no data to be saved.
"没有要保存的数据。"
[Explanation]
Appears if "Save" is selected without editing data.
W3505 “Set tray component to one.Is this OK? “
"设置盘组件，确定？
"
W3506 “<%s> will be registered.Is this OK? “
"<%s>将被注册，确定吗？"
W3507 “Registration of <%s> is in progress. “
"注册<%s>正在进行。"
W3508 <%s> will be called. Is this OK?
"<%s>将被命名，确定吗？"
[Explanation]
Appears if a resource is selected from the database list access.
W3509 “Pick data will become invalid.Is this OK? “
"挑选的数据将无效，确定吗？"
W3510 Select data to be duplicated.
"选择的数据被复制。"
[Explanation]
Appears if "Copy" is selected without no data selected.
W3511 Select one insertion position.
"选择一个插入位置。"
[Explanation]
Appears if "Line Insertion" is selected with more than one line selected.
W3512 Select one of duplicated data.
"选择一个复制数据。"
[Explanation]
Appears if "Line Duplication" is selected with more than one line selected.
W3513 Line of automatically selected data cannot be duplicated.
"自动选择数据线不能被复制."
[Explanation]
Appears if duplicating a line for which automatic station selection is specified.
W3514 Last datum will be deleted. Is this OK?
"最后数据将被删除，确定吗？"
[Explanation]
Appears if inserting or duplicating a line is selected with the maximum amount of data having been
specified for the mounting data.
W3515 “Several succeeding data will be deleted.Is this OK? “
"随后的几个数据将被删除，确定吗？"
W3516 “Some data cannot be created,because the total number is exceeded.Is this OK? “
"因为总数量已被超过，一些数据不能被创建，确定吗？"
E3517 MAX number is exceeded, so data cannot be created.
"最大数量已超过，数据不能被创建。"
[Explanation]
Appears if duplicating line is selected with the maximum amount of data having been specified for
the absorption data.
W3518 Program has been changed after optimization. Shall printing be continued?
"优化后程序已经被改变，继续打印吗？"
[Explanation]
Appears if printing is selected for data which have been edited after optimization.
W3519 Number of placements cannot exceed 10,000.
"贴片的数量不能超过 10,000 ."
[Explanation]
Appears if more than 10,000 mounting points are specified for the PWB data or mounting data.
W3520 Multiple pick data will be reduced to one by changing supply. Are you sure of changing supply?
"多重选择数据将由替换供给简化为一个，确定要替换供给?"
[Explanation]
Appears if the tray type is changed for the tray part for which more than one supply position have
been specified, in the part data.
E3521 This component already exists for a different type of station.
"因为位置的不同类型，该组件已经存在."
[Cause]
Appears if changing to a part is performed for which a different station is selected within the
mounting data.(Example of mounting data)
Part name StationA #2(710)
B #3(720)Appears if the part name A is replaced for A.
[Deal]
Change to another part name or select the same station.
E3522 Maximum data count exceeded! Data cannot be created.
"最大量数据计数超过，数据不能被创建。"
[Cause]
Appears if more than 3000 data is specified for the mounting data pasting.
[Deal]
Arrange the mounting data within 3000 data.
W3523 Editing will be discarded. Sure?
[Explanation]
Appears if another adhesion pattern name is selected when editing the application data for part data
application.
W3524 Verify will be unavailable. Sure?