JUKI贴片机错误代码.pdf - 第167页

E602236 “ Axis Driver:| Y-axis. The veloc ity error exceeded the limit.|(C heck the power supply for the possibilities of low power suppl y voltage.) ” “ Y 轴错误 : 速 度误差超过界限。 |( 可能电压不足，请检查电压。 ) ” E602536 “ Axis Driver:| YR…

100%1 / 464
E602231 “Axis Driver:| Y-axis status error.”
“Y 轴错误: 状态错误。”
E602331 “Axis Driver:| XR-axis status error.”
“XR 轴错误: 状态错误。”
E602431 “Axis Driver:| YC-axis status error.”
“YC 轴错误: 状态错误。”
E602531 “Axis Driver:| YR-axis status error.”
“YR 轴错误: 状态错误。”
E602132 “Axis Driver:| X-axis failed motion start.”
“X 轴错误: 启动失败。”
E602232 “Axis Driver:| Y-axis failed motion start.”
“Y 轴错误: 启动失败。”
E602332 “Axis Driver:| XR-axis failed motion start.”
“XR 轴错误: 启动失败。”
E602432 “Axis Driver:| YC-axis failed motion start.”
“YC 轴错误: 启动失败。”
E602532 “Axis Driver:| YR-axis failed motion start.”
“YR 轴错误: 启动失败。”
E602133 “Axis Driver:| X-axis failed motion stop.”
“X 轴错误: 停止失败。”
E602233 “Axis Driver:| Y-axis failed motion stop.”
“Y 轴错误: 停止失败。”
E602333 “Axis Driver:| XR-axis failed motion stop.”
“XR 轴错误: 停止失败。”
E602433 “Axis Driver:| YC-axis failed motion stop.”
“YC 轴错误: 停止失败。”
E602533 “Axis Driver:| YR-axis failed motion stop.”
“YR 轴错误: 停止失败。”
E602136 “Axis Driver:| X-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“X 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E602236 “Axis Driver:| Y-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“Y 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E602536 “Axis Driver:| YR-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“YR 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E602137 “Axis Driver:| X-axis. The motor encoder is abnormal.|(There is a possibility that the motor
damaged.)”
“X 轴错误: |马达编码器异常。|(可能马达损坏。)”
E602237 “Axis Driver:| Y-axis. The motor encoder is abnormal.|(There is a possibility that the motor
damaged.)”
“Y 轴错误: |马达编码器异常。|(可能马达损坏。)”
E602537 “Axis Driver:| YR-axis.The motor encoder is abnormal.|(There is a possibility that the motor
damaged.)”
“YR 轴错误: |马达编码器异常。|(可能马达损坏。)”
E602138 “Axis Driver:| X-axis. The position error exceeded the limit.”
“X 轴错误: |位置偏移量超过界限。”
E602238 “Axis Driver:| Y-axis. The position error exceeded the limit.”
“Y 轴错误: |位置偏移量超过界限。”
E602139 “Axis Driver:| X-axis. Amp fault error.”
“X 轴错误: |Amp 故障。”
E602239 “Axis Driver:| Y-axis. Amp fault error.”
“Y 轴错误: |Amp 故障。”
E602140 “Axis Driver:| X-axis. coordinate exceeds a movable range.”
“X 轴错误: |超过移动范围。”
E602240 “Axis Driver:| Y-axis. coordinate exceeds a movable range.”
“Y 轴错误: |超过移动范围。”
E602340 “Axis Driver:| XR-axis. coordinate exceeds a movable range.”
“XR 轴错误: |超过移动范围。”
E602440 “Axis Driver:| YC-axis. coordinate exceeds a movable range.”
“YC 轴错误: |超过移动范围。”
E602540 “Axis Driver:| YR-axis. coordinate exceeds a movable range.”
“YR 轴错误: |超过移动范围。”
E602141 “Axis Driver:| X-axis. The dac out error exceeded the limit.”
“X 轴错误 |DAC 输出超出界限。”
E602241 “Axis Driver:| Y-axis. The dac out error exceeded the limit.”
“Y 轴错误 |DAC 输出超出界限。”
E602541 “Axis Driver:| YR-axis. The dac out error exceeded the limit.”
“YR 轴错误 |DAC 输出超出界限。”
E602560 “Axis Driver:| YR-axis. The position error exceeded the limit.”
“YR 轴错误: |位置偏移量超过界限。”
E603110 “Axis Driver:| Z1-axis parameter error.”
“ Z1 轴错误: 参数错误。”
E603210 “Axis Driver:| Z2-axis parameter error.”
“ Z2 轴错误: 参数错误。”
E603310 “Axis Driver:| Z3-axis parameter error.”
“ Z3轴错误: 参数错误。”
E603410 “Axis Driver:| Z4-axis parameter error.”
“ Z4轴错误: 参数错误。”
E603510 “Axis Driver:| RZ1-axis parameter error.”
“ RZ1轴错误: 参数错误。”
E603610 “Axis Driver:| RZ2-axis parameter error.”
“ RZ2轴错误: 参数错误。”
E603710 “Axis Driver:| RZ3-axis parameter error.”
“ RZ3轴错误: 参数错误。”
E603810 “Axis Driver:| RZ4-axis parameter error.”
“RZ4轴错误: 参数错误。”
E603011 “Axis Driver:| Z-axis invalid unit.”
“Z 轴错误: 无效单元。”
E603112 “Axis Driver:| Z1-axis failed originating.”
“ Z1 轴错误: 回原点失败。”