JUKI贴片机错误代码.pdf - 第459页
-The data specified overlaps the range for installi ng the place ment part. Placement part overlaps the absorption data.-The absorbing positi ons specified part overlap one anot her. The a bsorbi ng positions specified p…
-Chip standup-detection is disabled. Station unavailable for chip-standup inspection
-Coplanarity inspection is disabled. Station unavailable for coplanarity inspection
-The verification is disabled. Station unavailable for the verification-IC mark part is disabled. Station
unavailable for IC mark
-Tray-holder is disabled. Type 770 or 775 station
-Nozzle 5 is disabled. Type 770 or 775 station
-44 and 56 mm feeders are disabled. Type 770 or 775 station
-The value specified for the outside dimension deviates from the range and not acceptable. Outside
dimension applied to the centering is out of the range
-The value specified for the part height deviates from the range and not acceptable. Height applied to
the centering is out of the range-Every head is disabled. Station with all heads disabled
-General-purpose head is disabled. Station unavailable for general-purpose head
-IC head is disabled. Station unavailable for IC head
-LAIC head is disabled. Station unavailable for LAIC head
-Specified centering is disabled. Station unavailable for the centering specified
-Vision centering is disabled. Station unavailable for vision centering
-ATC has no free space Station having no space for nozzle allocation via optimization-Placement
nozzle is not used Station with no placement nozzle specified
-Nozzle resource is insufficient Resource for used nozzle is insufficient
-Mounting data for layer 1 cannot be allocated Station unavailable for layer 1 allocation with
multi-layer mounting data
-Mounting data for layer 2 cannot be allocated Station unavailable for layer 2 allocation with
multi-layer mounting data
-Mounting data for layer 3 cannot be allocated Station unavailable for layer 3 allocation with
multi-layer mounting data-There is no free space to be allocated. Station having no space for the data
to be absorbed that can be allocated only to the specified station
-The mounting data has been fully specified. Station with which 2000 or more data were allocated
-The maximum number of the mounting data has been specified. Station with which 50 or more data
were allocated
-The maximum number of MTCs has been specified. Station with which 20 or more data were
allocated
-The maximum number of MTSs has been specified. Station with which 40 or more data pieces were
allocated-The maximum number of the tray-holders has been specified. Station with which 20 or
more data (for 730, 740, 750 and 760), or 5 or more data (for 720) were allocated
-A value specified deviates from the range. Station whose data specified for absorption deviates from
the area option range
-The specified data overlaps the range for installing the IC recycle belt. IC recycle belt overlaps the
absorption data.
-The data specified overlaps the range for installing the placement part. Placement part overlaps the
absorption data.-The absorbing positions specified part overlap one another. The absorbing positions
specified part overlap one another.
E6800 Error occurred in the dispenser division memory.
"分配划分内存出现错误。"
[Cause]
Reserving the memory for the application data allocation table was failed.
[Deal]
Exit from other applications and retry the process.
E6801 Placement data overflowed during dispenser division. (station No.%d)
"在分配区域时贴片数据溢出。(位置号%d)"
[Cause]
The maximum limit for the applicator mounting data was exceeded.
[Deal]
Decrease the application mounting or application-only data in the mounting data.
E6802 Component data overflowed during dispenser division. (station No.%d)
"在分配区域时组件数据溢出。(位置号%d)"
[Cause]
The maximum limit for the applicator part data was exceeded.
[Deal]
Decrease the application mounting or application-only data in the mounting data.
E6803 Adhesion data overflowed during dispenser division. (station No.%d)
"在分配区域时粘性数据溢出。 (位置号%d)"
[Cause]
The maximum limit for the applicator adhesion data was exceeded.
[Deal]
Decrease the adhesion data.
E6811 Placement data at %d position is not completed.
"在%d 位置贴片的数据不完全。"
[Cause]
The %dth mounting data is incomplete.
[Deal]
Complete the mounting data.
E6812 Component data at %d position is not completed.
"在%d 位置的组件数据不完全。"
[Cause]
The %dth part data is incomplete.
[Deal]
Complete the part data.
E6813 Adhesion data at %d position is not completed.
"在％d 位置的贴装数据不完全。"
[Cause]
The %dth adhesion data is incomplete.
[Deal]
Complete the adhesion data.
E6814 Station data at %d position is not completed.
"在%d 位置放置数据不完全。"
[Cause]
The %dth station data is incomplete.
[Deal]
Complete the station data.
E6821 A system error occurred in dispenser division.
"分配划分出现一个系统错误."
[Cause]
The numbers of the needles and stations are not corresponding with each other.
[Deal]
Start the MSL setup to check the needle type and set the needle type to use for the program data.
E6822 Needle setting of data at %d position is abnormal.
"在%d 位置针设置数据不正常."
[Cause]
The needle type for the specified station is different from the needle type for the adhesion data.
[Deal]
Start the MSL setup to check the needle type and set the needle type to use for the program data.
E6900 Insufficient memory in optimization.
"优化时内存不足."
[Cause]
Indicates insufficient free space in the memory.
[Deal]
Exit from other applications and retry the process.
E6901 Circuit number is out of range.