JUKI贴片机错误代码.pdf - 第32页
[Treatment] Please examine the Pick data. E241019 “ A type of a stick f eeder is not set up .” “ 没有指 定管状送料器的类型。 ” E241020 “ There is no input charact er ” “ 没有输入字符。 ” [Cause] There was no character when you h it the Ente…
E241013 “Component data is incomplete”
“组件数据不完整。”
[Cause]
The Component data is incomplete.
[Treatment]
Please complete the Component data.
E241014 “Index of pick data has irregularities. (%d)”
“吸取数据的索引错误。(%d)”
[Cause]
The index number of the Pick data is illegal. There is a possibility that the production program is
broken.
‧ : The index number of the Pick data.
[Treatment]
Please examine the production program.
E241015 “Pick data is incomplete”
“吸取数据不完整。”
[Cause]
The Pick data is incomplete.
[Treatment]
Please complete the Pick data.
E241016 “Setting the nozzle has not been allocated to ATC. | Allocate the nozzle to ATC using TC nozzle
setup function when machine setup. | Nozzle no. : %d”
“指定吸嘴没有安装在 ATC。|请用机器设置的 ATC 吸嘴设置功能设置相关吸嘴。|吸嘴
号 : %d”
[Cause]
The nozzle that is set in the Component data cannot be assigned to ATC.
|Nozzle No.
[Treatment]
Please check the nozzle No. in the Component data . If the nozzle No. is correct, please assign the
nozzle to ATC in the ATC Nozzle Allocation in the Machine Setup.
E241017 “Specified outlin of the component has irregularities.(%s)”
“组件尺寸错误。(%s)”
E241018 “There is no pick data available”
“实用吸取数据不存在。”
[Cause]
There is no data available in the Pick data linked to.
[Treatment]
Please examine the Pick data.
E241019 “A type of a stick feeder is not set up.”
“没有指定管状送料器的类型。”
E241020 “There is no input character”
“没有输入字符。”
[Cause]
There was no character when you hit the Enter key to define characters.
[Treatment]
Please enter characters.
E241021 “Input character has irregularities”
“输入字符不正确。”
[Cause]
The input characters were illegal when you hit the Enter key to define the characters.
[Treatment]
Please enter correct characters.
E241022 “Input value exceeds predetermined data range. | (Data range : %s - %)”
“输入值超过输入范围。|(输入范围 : %s - %s)”
[Cause]
The value when you hit the Enter key to define it exceeded the input range.
| input range
[Treatment]
Please enter a value that is within the input range.
E241023 “Component size is too big”
“组件尺寸偏大。”
[Cause]
Measurement/Inspection can not be performed since the component's size is too big.
[Treatment]
Please check the component's size.
E241024 “The start no. is larger than the end no.”
“开始号大于结束号。”
[Cause]
The starting component number is larger than the ending component number.
[Treatment]
Please re-enter the starting or ending component number, and make sure that the ending component
number is always larger than the starting component number.
W241025 “Measurement item is not selected”
“没有选择测定项目。”
[Cause]
Measurement cannot be performed since no measurement items are selected.
[Treatment]
Please select necessary measurement items.
E241026 “There is not a measurement possible component”
“要测定的组件不存在。”
[Cause]
As a result of a search by measurement conditions, there is no component that can be measured.
[Treatment]
Please check the measurement(inspection) conditions.
W241027 “The size relation of length and width does not agree with data.|width: %s ( %s ) length: %s ( %s )
|There is possibility that the setting of outline or direction are not fitting.”
“测量组件大小的结果，组件的长宽被颠倒。|宽度: %s ( %s ) 长度: %s ( %s ) |组件供给角
度设置可能有错。
E241028 “There is not a inspection possible component”
“要检查的组件不存在。”
[Cause]
A result of a search by inspection conditions, there is no component that can be inspected.
[Treatment]
Please check the inspection conditions.
E241029 “MTC is disable.”
“不能使用 MTC。”
E241030 “MTS is disable.”
“不能使用 MTS。”
E241031 “The origin point return does not end.|Please retry after completing the origin point return.”
“未结束返回原点。|返回原点结束后，请再次运行。”
E241032 “The servo motor is free.|Please retry after releasing the servo free state.”
“伺服马达处于未起动状态。|请起动伺服马达后，再次运行。”
E241033 “The interrupt which was not able to operate was detected. | The processing is interrupted.”
“查出不能运行的操作。|停止处理。”