JUKI贴片机错误代码.pdf - 第383页
E692005 “ A system error occurred.|The block no. is ille gal .” “ 发生系统错误。 | 非法块编号 (Blo ck No.) ” E692006 “ Writ ing-in buffer of flush mem ory does not get useable.|Bl ock N o.=% d ” “ 不能使用闪存卡的写入缓冲区。 | Block No.=%d ” E69…
[Cause]
The version of the common data that is saved in the flush memory and the version of the application
are clashing with each other.
‧The application was versioned up.
[Treat]
E691014 “The data length for the common data of flush memory is abnormal”
“闪存卡的共通数据的数据长度错误。”
[Cause]
The data length of the common data that is saved in the flush memory is irregular.
‧The common data of flush memory is broken.
‧Flush memory is broken.
[Treatment]
‧Please re-start the application.
‧Please re-install or version up the application.
‧If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E691015 “The data kind for the common data is abnormal”
“共通数据的数据种类错误。”
[Cause]
Data type parameter is invalid.
[Treatment]
‧Please re-start the application.
‧Please re-install or version up the application.
‧If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E691016 “A system error occurred.|The machine type is illegal.”
“发生系统错误。|机器类型错误。”
E692001 “A system error occurred.|The command cannot be executed.”
“发生系统错误。|不能执行命令。”
E692002 “A system error occurred.|There is no response.”
“发生系统错误。|没有响应。”
E692003 “A system error occurred.|The command flag is illegal.”
“发生系统错误。|非法命令标记。”
E692004 “A system error occurred.|The command is illegal.”
“发生系统错误。|非法命令。”
E692005 “A system error occurred.|The block no. is illegal.”
“发生系统错误。|非法块编号(Block No.)”
E692006 “Writing-in buffer of flush memory does not get useable.|Block No.=%d”
“不能使用闪存卡的写入缓冲区。|Block No.=%d”
E692007 “Deleting cue of flush memory does not get useable.|Block No.=%d”
“不能使用闪存卡的删除指令。|Block No.=%d”
E692008 “WSM(Write State Machine) of flush memory does not get ready.|Block No.=%d”
“闪存卡的WSM(Write State Machine)不能达到准备状态。|Block No.=%d”
E692009 “Write-in voltage range error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生写入电压范围错误。|Block No.=%d”
E692010 “Device Protection error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，存发生设备保护错误。|Block No.=%d”
E692011 “Write-in error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生写入错误。|Block No.=%d”
E692012 “Command sequence error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生命令次序错误。|Block No.=%d”
E692013 “Lock Bit Set error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生Lock Bit Set错误。|Block No.=%d”
E692014 “Lock Bit Clear error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生Lock Bit Clear错误。|Block No.=%d”
E692015 “HMS is not installed.”
“没有安装HMS “
E692016 “The measured value of HMS is unusual.”
“HMS测量值异常 “
E692017 “The abnormalities in HMS measured value.|Measured value is outside the measurement range.”
“HMS测量值异常。|超过测量范围。 “
E693001 “The control of VCS is invalid in this model.”
“当前机种不支持VCS控制。”
E693002 “The specification of the head is abnormal.”
“HEAD的规格错误。”
E693003 “The specification of OCC is abnormal.”
“OCC的规格错误。”
E693004 “The specification of VCS is abnormal.”
“VCS的规格错误。”
E693005 “The specification of the device is abnormal.”
“设备的规格错误。”
E693006 “The side illumination of standard VCS(R) it does not rise.”
“标准VCS(R)的侧面照明不能上升。”
E693007 “The side illumination of option VCS(R) does not rise.”
“选项VCS(R)的侧面照明不能上升。”
E693008 “The side illumination of standard VCS(L) it does not rise.”
“标准VCS(L)的侧面照明不能上升。”
E693009 “The side illumination of option VCS(L) does not rise.”
“选项VCS(L)的侧面照明不能上升。”
E693010 “The side illumination of standard VCS(R) it does not descend.”
“标准VCS(R)的侧面照明不能下降。”
E693011 “The side illumination of option VCS(R) does not descend.”
“选项VCS(R)的侧面照明不能下降。”
E693012 “The side illumination of standard VCS(L) it does not descend.”
“标准VCS(L)的侧面照明不能下降。”
E693013 “The side illumination of option VCS(L) does not descend.”
“选项VCS(L)的侧面照明不能下降。”
E693014 “The position sensor of the side illumination of standard VCS(R) it is abnormal.”
“标准VCS(R)的侧面照明位置传感器错误。”
E693015 “The position sensor of the side illumination of option VCS(R) is abnormal.”
“选项VCS(R)的侧面照明位置传感器错误。”
E693016 “The position sensor of the side illumination of standard VCS(L) it is abnormal.”
“标准VCS(L)的侧面照明位置传感器错误。”
E693017 “The position sensor of the side illumination of option VCS(L) is abnormal.”
“选项VCS(L)的侧面照明位置传感器错误。”