JUKI贴片机错误代码.pdf - 第298页

E631223 “ Termi nal component error: Cannot detect a lead (Right side) .” “ 端子组件识别错误 : 没有引脚（右面 ） “ E631224 “ Termi nal component error: Wrong lead width (Up side) ” “ 端子组 件识别错误 : 引脚宽度异常（上面） “ E631225 “ Termi nal componen…

100%1 / 464
“ 照明图形结果代码:不能保证识别度 “
[Cause]
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment]
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631202 “The light is not ON. Please examine it”
“ 照明图形结果代码:不能识别 “
[Cause]
The camera cable is cut off.
The light cable is cut off.
LED is broken.
The light board is broken.
The camera is broken.
[Treatment]
Please change the camera cables.
Please change the light cables.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
Please change the cameras and re-enter the MS parameter.
E631220 “Terminal component error: Cannot detect a lead (Up side).”
“ 端子组件识别错误:没有引脚（上面） “
E631221 “Terminal component error: Cannot detect a lead (Bottom side).”
“ 端子组件识别错误:没有引脚（下面） “
E631222 “Terminal component error: Cannot detect a lead (Left side).”
“ 端子组件识别错误:没有引脚（左面） “
E631223 “Terminal component error: Cannot detect a lead (Right side).”
“ 端子组件识别错误:没有引脚（右面） “
E631224 “Terminal component error: Wrong lead width (Up side)”
“ 端子组件识别错误:引脚宽度异常（上面） “
E631225 “Terminal component error: Wrong lead width (Bottom side)”
“ 端子组件识别错误:引脚宽度异常（下面） “
E631226 “Terminal component error: Wrong lead width (Left side)”
“端子组件识别错误:引脚宽度异常（左面） “
E631227 “Terminal component error: Wrong lead width (Right side)”
“端子组件识别错误:引脚宽度异常（右面） “
E631228 “Terminal component error: Component detection error”
“端子组件识别错误:测量组件异常 “
E631229 “Terminal component error: Wrong direction”
“端子组件识别错误:组件方向错误 “
E631230 “Terminal component error: Component size is wrong.”
“端子组件识别错误:组件尺寸错误 “
E631240 “All head vision recognize error: Component touches the window frame.”
“ 全部 Head 的组件识别错误:组件处于检测框边缘 “
E631300 “SOT orientation inspection error: SOT inspect unit is dirty.”
“ SOT 方向错误:检查台被弄脏 “
E631301 “SOT orientation inspection error: The range of brightness is too narrow.”
“ SOT 方向错误:亮度等级不明显 “
E631302 “SOT orientation inspection error: The orientation of component is upside down.”
“ SOT 方向错误:方向差 180 度 “
E631303 “SOT orientation inspection error: The orientation of component is different.”
“ SOT 方向错误:方向不同 “
E631500 “Component matching teaching error: Cannot find a characteristic feature.”
“组件示教结果代码:没发现特征 “
E631501 “ Component matching teaching error: Outline trace error”
“ 组件示教结果代码:没发现轮廓 “
E631502 “ Component matching teaching error: Other Failures”
“ 组件示教结果代码:取其它特征时失败 “
E631999 “The recognition error which cannot be assigned has occurred.”
“ 发生不能分配的识别错误 “
E632000 “LSC Command Handshake Error.”
“ 通讯错误: 连接 LSC 命令错误 “
E632001 “LSC Responce Handshake Error.”
“ 通讯错误: LSC 响应错误 “
E632002 “LSC Undefined Command Request.”
“ 使用未定义的 LSC 命令 “
E632003 “LSC Image Caputure Timeout.”
“ 取得 LSC 图像数据时发生超时 “
E632004 “LSC Operation Error(No Image).”
“ LSC 操作失败(没有图像) “
E632005 “LSC Image Mode(GrayScale/Binaly) is not Correct.”
“ LSC 图像类型错误（多值/2 值）”
E632006 “LSC Undefined Window ID Request.”
“ 未定义的窗口 “
E632020 “LSC Para Count is invalid.”
“ LSC 同时识别次数与设置值不一样 “
E632021 “LSC Nouse Sequence No.”
“ LSC 识别顺序号错误 “
E632022 “LSC Undefined Sequence No.”
“ 未定义的 LSC 识别顺序号”
E632023 “LSC Vision Control Semaphore Wait Timeout.”
“ 要获得图像控制信号时失败（发生超时） “
E632099 “LSC Undefined Error Happened.”
“ 发生其它未定义错误 “
E633000 “LSC Primitive Error:Sensor Status Error.”
“ LSC 错误：传感器状态错误 “