JUKI贴片机错误代码.pdf - 第442页
E4004 “ Allocation for source t able use failed. “ " 为资源表使用分配失败 ." E4005 “ Allocation for use of previous ly mounted components fai led. “ " 为预定贴装使用分配失败 ." E4006 “ Line configuration fi le is incorrec…
[Cause]
Indicates that the line has 710, 720, or 770.
[Deal]
Check the circuit division number (n x n).
E3868 No adhesize data exists,unless dispensing bond.
[Cause]
Appears if there is no adhesion data despite "Mounting-Application" or "Only Mounting" is selected
for the item "Application/Mounting" in the mounting data.
[Deal]
Create adhesion data.
E3908 “File open failed. “
"打开文件失败."
E3909 “File close failed. “
"关闭文件失败."
E3910 “Data read-in or file conversion failed. “
"数据读入或文件转换失败."
E3914 “File has no extension. “
"文件不扩展."
E3919 “INI file has no entry. “
"INI 文件没有目录."
E3920 “Memory cannot be secured. Please terminate other application and do it again. “
"内存不能被保护，请终止其它应用并重新执行."
E3928 “File is being used by another application. Please terminate other application and do it again. “
"文件已经被其它应用使用，请终止其它应用并重新操作."
E3929 “This file type is not supported. File version or file type is incorrect. Please check the file. “
"不支持该文件类型. 文件版本或文件类型不正确.请检查文件."
E4001 “Initialization failed. “
"初始化失败."
E4002 “Allocation for profile use failed. “
"为剖面使用分配失败."
E4003 “Allocation for line configuration use failed. “
"给线外形分配使用失败."
E4004 “Allocation for source table use failed. “
"为资源表使用分配失败."
E4005 “Allocation for use of previously mounted components failed. “
"为预定贴装使用分配失败."
E4006 “Line configuration file is incorrect.Please repeat setup. “
"线结构文件不正确，请重新设置."
E4007 “INI file information is incorrect.Please repeat setup. “
"文件信息不正确，请重新设置."
E4008 “Reserved program does not exist. “
"保留程序不存在."
E4009 “Reserved program file cannot be created. “
"不能创建保留程序文件."
E4010 “Opening of reserved program file failed. “
"打开保留程序失败."
E4011 “Read-in of reserved program file failed. “
"读入保留程序失败."
E4012 “Write-in of reserved program file failed. “
"写入保留程序失败."
E4013 “Reserved program for production not yet performed does not exist. “
"不能执行的为生产的保留程序不存在."
E4014 “Full management information line cannot be set. “
"
整体管理信息线不能被设置."
E4015 “Acquisition of information for full management information line failed. “
"为整体管理信息获得信息失败."
E4016 “Management information station ID = %dinformation acquisition failed. “
"管理信息位置 ID=%D 获得信息失败."
E4017 “Number of components information station ID = %dinformation acquisition failed. “
"获得组件信息位置 ID=％d 信息数量失败."
E4018 “Number of components information area allocation failed. “
"组件信息区域数量分配失败."
E4019 “Timer for flashing light cannot be set. “
"为闪光灯设置的定时器不能设置."
E4020 “Communication processing start-up failed. “
"通讯过程激活失败."
E4021 “Communication processing has not been started up. “
"通讯过程未被激活."
E4022 “Communication processing initialization file read-in failed. “
" 通讯过程读入初始化文件失败."
E4023 “Optimization processing has been aborted. “
"优化过程已经失败."
E4024 “An error occurred in optimization processing. “
"在优化过程中出现一个错误."
E4025 “Coupling processing has been aborted. “
"连接过程已经失败."
E4026 “An error occurred in coupling processing. “
"连接过程出现一个错误."
E4027 “Production conditions information station ID = %dinformation acquisition failed. “
"生产条件信息位置 ID = %d 信息获得失败."
E4028 “Error log information station ID = %dinformation acquisition failed. “
"错误文件信息位置 ID=%d,获得信息失败."
E4029 “
Coupling processing start-up failed. “
" 激活耦合过程失败."
E4030 “Arc net driver could not be started up. “
"不能激活弧状网络驱动程序."
E4031 “Production will be ended. “
" 生产将被终止."
E4032 “Transmission failed. <Station ID = %d Send status = %s> Do you want to continue this
transmission? “
"传送失败.<位置 ID = %d 发送状态 = %s>传送终止，要继续传送吗 "
E4033 “Receive error occurred. <Station ID = %d Receive status = %s> Do you continue this
transmission ? “