JUKI贴片机错误代码.pdf - 第22页
[Cause] The user defined template has a similar patter in t he upper par t of the template. [Treatment] Please re-teach other user defin ed templates to the machine. If you do not have ot her user defined templates, curr…
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E191100 “Camera type has not been selected. | Please chooses camera type and teaches again”
“ 没有选择摄像机。|请选择摄像机后，再示教。 “
[Cause]
A request was issued to teach marks with other devices than a camera.
[Treatment]
Please select a camera device, and try again.
E191101 “The contrast for the entire image is too low. | Please modifies the conditions and teaches again”
“ 图像全体的对比度偏低。|请更改条件后，再示教。 “
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
E191102 “The template has no features. | Please modify the conditions and teach again”
“ 模板上无特征。|请更改条件后，再示教。 “
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
E191103 “Failed to automatically learn the recognition conditions of template. | Details: %d | Please modify
the conditions and teach again”
“ 自动取得模板的识别条件失败。|详细:%d|请更改条件后，再示教。 “
[Cause]
Please refer to XXXXXX.
Some program versions are clashing with each other.
[Treatment]
‧Please re-install or version-up the application.
‧ Please re-start your machine.
E191104 “Input value exceeds predetermined data range.”
“ 输入值的大小超出输入范围。 “
Q191300 “There is a similar pattern in the upper part of the template. | Would you like to take the teaching
results in?”
“模板上方存在类似的图案。|是否获取示教结果？”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q191301 “There is a similar pattern in the lower part of the template. | Would you like to take the teaching
results in?”
“模板下方存在类似的图案。|是否获取示教结果？”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q191302 “There is a similar pattern on the left side of the template. | Would you like to take the teaching
results in?”
“模板左边存在类似的图案。|是否获取示教结果？”
[Cause]
The user defined template has a similar patter on the left side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q191303 “There is a similar pattern on the right side of the template. | Would you like to take the teaching
results in?”
“模板右边存在类似的图案。|是否获取示教结果？”
[Cause]
The user defined template has a similar patter on the right side of the template.
用户定义的模板右边有类似的图案。
[Treatment]
Please re-teach other user defined templates to the machine.
请选择其它用户定义模板再示教。
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
没有其它用户定义模板时，即使识别不正确，也要读取结果。
Q191304 “The template does not have enough contrast. | Would you like to take the teaching results in?”
“因模板的对比度不够，标记识别不完整。|是否获取示教结果？”
[Cause]
The user defined template does not have enough contrast.
用户定义模板没有明显的对比度。
[Treatment]
Please re-teach other user defined templates to the machine.
请选择其它用户定义模板再示教。
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
没有其它用户定义模板时，即使识别不正确，也要读取结果。
Q191305 “The template has no features. | Would you like to take the teaching results in?”
“模板上无特征。|是否获取示教结果？”
[Cause]
The specified user defined template does not have any notable patterns.
被指定的用户定义模板上无特别图案。
[Treatment]
Please re-teach other user defined templates to the machine.
请选择其它用户定义模板再示教。
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
没有其它用户定义模板时，即使识别不正确，也要读取结果。
E192000 “A system error occurred.|Failed in create of the mail object.|Detail code=0x%08X”
“发生系统错误。|建立邮件对象失败。|详细代码=0x%08X”
E192001 “A system error occurred.|Failed in the opening of the mail of the application-manager.|Detail
code=0x%08X”
“发生系统错误。|打开程序管理邮件失败。|详细代码=0x%08X”
E192002 “A system error occurred.|Failed in the mail transmission to the application-manager.|Detail
code=0x%08X”
“发生系统错误。|给程序管理发送邮件失败。|详细代码=0x%08X”
E192003 “A system error occurred.|Failed in the mail reception.|Detail code=0x%08X”
“发生系统错误。|接受邮件失败。|详细代码=0x%08X”
E192004 “A system error occurred.|Sending station ID is abnormal.|ID= %d”
“发生系统错误。|发送站点 ID 错误。|ID= %d”