JUKI贴片机错误代码.pdf - 第388页
E695016 “ The bus error occurred by the laser board(R) .” “ 激光板 (R) 总线发生错误。 ” E695017 “ It failed in initialization of a l aser board(L) .” “ 激光板 (L) 的初始化失败。 ” E695018 “ It failed i n initializati on of a laser board(R) …
E694019 “The motor revolution is abnormal.”
“ 马达旋转次数异常。”
E694020 “A memory of sencer is abnormal.”
“ 传感器内存异常。”
E694021 “A initialize error of coplanarity unit.”
“ 初始化共面单元时发生错误。”
E694022 “An axis error of coplanarity measurement.”
“ 共面测量时轴发生错误。”
E694030 “The component type can not be measured.”
“ 指定的组件类型错误。”
E694031 “The component size is too large.”
“ 组件尺寸过大，超过测量范围。”
E694032 “The component size is out of range.”
“ 组件尺寸超过测量范围。”
E694033 “The component height is too high.”
“ 组件高度过高，超过测量范围。”
E694034 “The measurement mode is not correct or the component can not be measured.”
“ 指定的测量方法有问题或指定组件类型错误。”
E694035 “The electrode can not be measured.”
“ 所指定的电极不能测量。”
E694036 “A coplanarity sensor is unused.”
未用共面检测
E695012 “Parameter for the head is not correct.”
“HEAD参数不正确。”
E695013 “The bus error occurred by the laser board(L).|Please check a laser board.”
“激光板(L)总线发生错误。|请检查一下激光板。”
E695014 “The bus error occurred by the laser board(R).|Please check a laser board.”
“激光板(R)总线发生错误。|请检查一下激光板。”
E695015 “The bus error occurred by the laser board(L).”
“激光板(L)总线发生错误。”
E695016 “The bus error occurred by the laser board(R).”
“激光板(R)总线发生错误。”
E695017 “It failed in initialization of a laser board(L).”
“激光板(L)的初始化失败。”
E695018 “It failed in initialization of a laser board(R).”
“激光板(R)的初始化失败。”
E695019 “Timed out waiting for dsout to change. (EEPROM erase)”
E695020 “Timed out waiting for dsout to change. (EEPROM write)”
E695021 “The bus error occurred by the laser board.|Please check a laser board.”
“激光板总线发生错误。|请检查一下激光板。”
E696001 “The error occurred in reading of a PCI configuration register.”
“读PCI总线配置寄存器时发生错误。”
E696002 “The error occurred in the writing of a PCI configuration register.”
“写PCI总线配置寄存器时发生错误。”
E696003 “The error occurred in the address translation of a VME bus.”
“修改VME总线地址时发生错误。”
E696004 “The error occurred in memory allotment of a VME bus.”
“分配VME总线内存时发生错误。”
E696005 “The error occurred in memory release of a VME bus.”
“释放VME总线内存时发生错误。”
E696006 “The error occurred in the event creation for the notice of interruption.”
“建立中断通知用事件时发生错误。”
E696007 “The error occurred in registration of an interruption handler.”
“注册中断入口时发生错误。”
E696008 “The error occurred in release of an interruption handler.”
“释放中断入口时发生错误。”
E696009 “The parameter of a VME bus address is not right.”
“VME总线地址参数错误。”
E696010 “Abnormalities occurred to the VME power supply.”
“VME电源异常。”
第八章 MS参数
[MS 参数、自动校准]
E901001 “Memory allocation error.”
“分配内存错误”
E901002 “Shard memory open error.”
“打开共享内存错误”
E901011 “It failed to read the VCS program file.(%d)| %s”
“读取VCS程序文件失败。(%d)| %s”
E901012 “It failed to read the I/O CPU program file.(%d)”
“读取I/O CPU程序文件失败。(%d)”
E901013 “It failed to read the B/F CPU program file.(%d)”
“读取B/F CPU程序文件失败。(%d)”
E901014 “The written data is not corresponding to the read data.|Block=%d Write=0x%02X Read=0x%02X”
“写入的数据与读取的数据不一致。|Block=%d Write=0x%02X Read=0x%02X”
E901015 “File name for upgrade is wrong.”
“文件名错误”
E901016 “It failed to read the program file.(%d)”
“读取程序文件失败。(%d)”
E901017 “The check sum of the program file is illegal. %d”
“程序的和数校验错误。%d”
E901018 “The program file is illegal. %d”
“程序错误。%d”
E901019 “CRC of the program file is illegal. Expect(0x%08X) Result(0x%08X)”
“程序的CRC错误。预期值(0x%08X) 结果(0x%08X)”
E901020 “Failed in initialization.”
“初始化失败。”
E901021 “There is no input character.”
“没有输入字符。”
E901022 “Input character has irregularities.”
“存在非法字符。”