JUKI贴片机错误代码.pdf - 第295页
The user defined template has a similar patter in t he upper par t of the template. [Treatment] Please re-teach other user defin ed templates to the machine. If you do not have ot her user defined templates, current temp…
E631124 “ Random ball recognition error: Ball existence inspection (brightness) error.”
“任意球识别错误:检查球是否存在(亮度)出错”
E631125 “ Random ball recognition error: Too few samples for ball existence inspection (brightness).”
“任意球识别错误:检查球是否存在(亮度)的样品数偏少”
E631140 “ Ball inspection error: Ball detection error”
“球检查错误:球检查错误”
E631141 “ Ball inspection error: Ball matrix size error”
“球检查错误:球矩阵大小错误”
E631142 “ Ball inspection error: Ball count error”
“球检查错误:球数错误”
E631143 “ Ball inspection error: Ball diameter error”
“球检查错误:球直径错误”
E631144 “ Ball inspection error: Error in getting brightness reference”
“球检查错误:亮度基准取得错误”
E631145 “ Ball inspection Error: Brightness characteristics error”
“球检查错误:亮度特性错误”
E631160 “ Outline measurement error: Component tilt is too large.”
“外形测量错误:组件过于倾斜”
E631161 “ Outline measurement error: Component size is too large.”
“外形测量错误:组件尺寸过大”
E631162 “ Outline measurement error: Component size is too small.”
“外形测量错误:组件尺寸过小”
E631163 “ Outline measurement error: Cannot find a component.”
“外形测量错误:组件不存在”
E631170 “ Lead measurement error: Unknown lead pitch”
“引脚测试错误:不是适当的引脚间距”
E631171 “ Lead measurement error: Cannot detect leads.”
“引脚测试错误:没有引脚”
E631180 “ Template matching error: A similar pattern is found in the upper part of the searched area.”
“ 模板自动取得错误:因上面有类似的模式”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631181 “There is a similar pattern in the lower part of the template. | Would you like to take the teaching
results in?”
“ 模板自动取得错误:因下面有类似的模式”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631182 “There is a similar pattern on the left side of the template. | Would you like to take the teaching
results in?”
“模板自动取得错误:因左面有类似的模式”
[Cause]
The user defined template has a similar patter on the left side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631183 “There is a similar pattern on the right side of the template. | Would you like to take the teaching
results in?”
“模板自动取得错误:因右面有类似的模式”
[Cause]
The user defined template has a similar patter on the right side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631184 “The template does not have enough contrast. | Would you like to take the teaching results in?”
“模板自动取得错误:对比度过低(存在类似模板)”
[Cause]
The user defined template does not have enough contrast.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631185 “The template has no features. | Would you like to take the teaching results in?”
“模板自动取得错误:几乎没有特征”
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
E631186”The contrast for the entire image is too low. | Please modify the conditions and teach again”
“ 模板自动取得错误:完全没有特征”
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
Q631200 “The light is getting darker. Please clean the light”
“ 照明图形结果代码:该调整(交换)照明 “
[Cause]
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment]
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631201 “The light is too dark. Please clean the light”