JUKI贴片机错误代码.pdf - 第94页
E500104 “ Input range has been excee ded. |(Input range: %s) ” “ 超过输入范围。 |( 输入范围 : %s) ” E500200 “ PWB data has not been completed ” “ 没有完成基板数据。 ” [Cause] The production can not be started since the PWB data of the Pro d…
软驱上没有插入软盘(保存生产程序)。
[解决]
请插入软盘, 保存生产程序， 或者选择[另存为]保存到另一个活页夹里。
E500008 “The file name is not a production program created by the machine.|It is necessary to change in the
file name. Is the file name changed?”
“生产文件名不是本机器的常规文件名，|需要更改文件名，是否更改？”
[原因]
现在读出来的生产程序不是在本机器上所生成的,所以现在的后缀名上不能覆盖。
[解决]
若选择[是]键，就出现[另存为]对话框，这时候把生产程序的后缀名改为本机器所用的后
缀名后，请保存生产程序。
若选择[否]键则不保存生产程序。
E500100 “Incorrect character has been input”
“输入了非法字符。”
[Cause]
You tried to enter incorrect data.
正要输入非法字符。
[Treatment]
Please re-enter correct data.
请正确输入字符。
E500101 “Input range has been exceeded. | The resumption position of a placement point is set outside of the
possible range”
“超过输入范围，|再开始位置被设置在贴片点范围外。”
[Cause]
The entered resumption position of a placement point exceeded the input range.
[Treatment]
Please enter the value that is under the maximum number of placement points.
E500102 “Input range has been exceeded. | (Input range: %ld - %ld)”
“超过输入范围。|(输入范围: %ld - %ld)”
[Cause]
The input value exceeded the input range.
|The maximum and minimum values of the input range.
[Treatment]
Please enter a value that is within the input range.
E500103 “Input range has been exceeded. |(Input range: %s)”
“超过输入范围。|(输入范围: %s)”
E500104 “Input range has been exceeded. |(Input range: %s)”
“超过输入范围。|(输入范围: %s)”
E500200 “PWB data has not been completed”
“没有完成基板数据。”
[Cause]
The production can not be started since the PWB data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and complete the PWB data.
E500201 “Placement data has not been completed”
”没有完成贴片数据。”
[Cause]
The production can not be started since the Placement data of the Production program that is currently
loaded on the memory is incomplete. However, 'complete' here applies only to the placement data that
will actually be placed (the placement data that will be skipped is not included), and production
programs that are considered as 'incomplete' in the Production Program Editor may become
'complete' in the production.
[Treatment]
Please go to the Production Program Editor and complete the Placement data.
E500202 “Component data has not been completed”
”没有完成组件数据。”
[Cause]
The error is likely to happen when starting a production by pressing the START button on the
operation panel. The production can not be started since the PWB data of the Production program that
is currently loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and complete the PWB data.
E500203 “Pick-up data has not been completed”没有完成吸取数据。”
[Cause]
The production can not be started since the Pick data of the Production program that is currently
loaded on the memory is incomplete. However, 'complete' here applies only to the pick data that will
actually be picked (a pick data which is set to “not use” is not included), and production programs that
are considered as 'incomplete' in the Production Program Editor may become 'complete' in the
production.
[Treatment]
Please go to the Production Program Editor and complete the Pick data.
E500204 “Mark data has not been completed”
“没有完成标记数据。”
[Cause]
The production can not be started since the Mark data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and see the BOC mark setting of the PWB data and the
IC mark setting of the Placement data.
E500205 “Vision data has not been completed”
“没有完成图像数据。”
[Cause]
The production can not be started since the Vision data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and see the Vision data.
E500206 “Teaching of acknowledgment of BOC mark has not been completed”
“识别 BOC 标记示教尚未结束。”
[Cause]
The Recognition teaching of BOC mark the Production program that is currently loaded on the
memory is incomplete.
[Treatment]
Please go to the Production Program Editor and see the Recognition teaching in the PWB data.
[Remarks]
Please note that whether the recognition teaching of BOC marks is done or not will not affect on the
completion status of the PWB data.
E500207 “Teaching of acknowledgment of IC mark has not been completed”
“基板基准领域标记示教尚未结束。”
[Cause]
The Recognition teaching of IC mark the Production program that is currently loaded on the memory
is incomplete.
[Treatment]
Please go to the Production Program Editor and see the IC teaching in the Placement data.
[Remarks]
In a normal production program, a placement data is considered as 'incomplete' when its recognition
teaching of IC mark has not been done. There is a possibility that the production program is broken
when the error occurs.