JUKI贴片机错误代码.pdf - 第449页
" 显示对话框失败。 " E6007 System error has occurred. " 出现系统错误。 " [Cause] After creating a table for mou nting, creating a feeder layout w indow with no mounting dat a was f a i l e d . [Deal] Consult the man…
吗？"
W5507 “Backup file has not been created “
"不能创建备份文件。"
W5508 “This version cannot accept the database file which contains adhesive data. “
"该版本不能接受包含粘性数据的数据库文件。"
E6000 “Optimization is interrupted. “
"优化被中断。"
E6001 File output failed.
"文件输出失败。"
[Cause]
Loading the files, G3H, G3N, and OSL, was failed. Locking and unlocking a file was failed. Moving
the temporary directory was failed. Free space in the memory may be insufficient.
[Deal]
Run the "Scan-disk" to check the disk.
Delete unnecessary files and retry the process.
E6002 Memory assignment failed.
"分配内存数量失败。"
[Deal]
Allocating memory to the table was failed. EPU optimizing loading was failed.
[Cause]
Exit from other applications and retry the process.
E6003 “Memory lock failed. “
"锁定内存失败。"
E6004 “Memory release failed. “
"自动释放内存失败。"
E6005 Dialog box creation failed.
"创建对话框失败。"
[Cause]
Generating dialogs pertinent to optimization was failed. Insufficient free space in memory or a
failure on the disk is suspected.
[Deal]
Run the "Scan-disk" to check the disk. Exit from other applications, and retry the process.
E6006 “Dialog box display failed. “
"显示对话框失败。"
E6007 System error has occurred.
"出现系统错误。"
[Cause]
After creating a table for mounting, creating a feeder layout window with no mounting data was
failed.
[Deal]
Consult the manufacturer.
E6008 Failed to combine the program.
[Cause]
Merging the divided programs was failed.
[Deal]
Retry the process.
E6009 Tact simulation failed.
[Cause]
An error was detected at the line entry. Insufficient free space in the memory or a failure on the disk
is suspected.
[Deal]
Run the "Scan-disk" to check the disk. Exit from other applications, and retry the process.
E6100 Number supplied is out of range.
"供给的数量超出范围。"
[Cause]
An excessive value was specified for the number of supplies.
[Deal]
Enter a value within the range.
E6101 “Error occurred in finding number supplied, upper limit of number supplied or lower limit of
number supplied. “
"在查找提供数量时出现错误，增加提供的数量限制或降低提供的数量限制。"
E6102 “HLC.INI file read-in failed. “
"读入 HLC.INI 文件失败。"
E6103 “Data is input so as to eliminate all machine stations from partition destinations. “
" 数据被输入为了从注定分开区域终止所有机器位置。"
E6104 “Number of distributed stations is outside limits. “
"分配位置数量超过外部限制。"
E6105 Please select component.
"请选择组件。"
[Cause]
Appears if the number of supplies change button is pressed without a list selected.
[Deal]
Click the part name to highlight it and press the change button or double-click the part name.
E6106 “HLCSETUP.INI file read-in failed. “
"读入 HLCSETUP.INI 文件失败。"
E6109 Enter numeric value.
[Cause]
Appears if no numeric value or any value other than numeric is specified for the feedback option and
the number of redundant factors.
[Deal]
Specify valid values for the feedback option or the number of redundant factors.
E6110 Setting of the number of max loop count is out of range.
[Cause]
An excessive number of the maximum loops was specified for the feedback option.
[Deal]
Enter a value within the range, 1 to 9.
E6111 Setting of target difference time is out of range.
[Cause]
Excessive value was specified for the allowable interval of the feedback option.
[Deal]
Enter a value within the range, 0 to 60 seconds.
E6112 Cannot distribute data with this setting.
[Cause]
For every station, 0 is specified in the balance option.
[Deal]
Check the station to allocate mounting points or application points, and specify the distribution.
E6113 Setting of balance is out of range.
[Cause]
An excessive value was specified for the balance option.
[Deal]
Enter a vale within the range, 0 to 100.