JUKI贴片机错误代码.pdf - 第301页
E640003 “ MTC SYSTEM ERROR (E003) : Ready Time Out .” “ MTC 系统错误 (E003) : 准备超时 ” E640004 “ MTC SYSTEM ERROR (E004) : ETX Time Out .” “ MTC 系统错误 (E004) : 正文结束符 (ETX) 超时 ” E640005 “ MTC SYSTEM ERROR (E005) : Sync Character…
E633001 “LSC Primitive Error:Command Syntax Error.”
“ LSC 错误：命令语法错误 “
E633002 “LSC Primitive Error:Illegal Command.”
“ LSC 错误：执行未定义的命令 “
E633003 “LSC Primitive Error:Command Parameter Error.”
“ LSC 错误：命令参数错误 “
E633004 “LSC Primitive Error:Command Parameter out of range.”
“ LSC 错误：参数超过设置范围”
E633005 “LSC Primitive Error:Window Overlap.”
“ LSC 错误：窗口重迭 “
E633006 “LSC Primitive Error:Undefined Window.”
“ LSC 错误：执行未定义的窗口 “
E633007 “LSC Primitive Error:Active Window count limit exceeded(>16).”
“ LSC 错误：活动窗口过多（大于 16） “
E633008 “LSC Primitive Error:Operation cannot be performed.”
“ LSC 错误：此命令无效 “
E633009 “LSC Primitive Error:Window not active.”
“ LSC 错误：无效的窗口 “
E633010 “LSC Primitive Error:Parameter missing.”
“ LSC 错误：参数个数有错 “
E633011 “LSC Primitive Error:Bad Check Summ.”
“ LSC 错误：LSC 通讯 Check Summ 错误 “
E633012 “LSC Primitive Error:Command not implemented.”
“ LSC 错误：执行没有安装的命令 “
E640000 “MTC SYSTEM ERROR (E000) : Command Error.”
“MTC 系统错误(E000) : 指令错误”
E640001 “MTC SYSTEM ERROR (E001) : Parameter Error.”
“MTC 系统错误(E001) : 参数错误”
E640002 “MTC SYSTEM ERROR (E002) : Empty Parts.”
“MTC 系统错误(E002) : 无组件”
E640003 “MTC SYSTEM ERROR (E003) : Ready Time Out.”
“MTC 系统错误(E003) : 准备超时”
E640004 “MTC SYSTEM ERROR (E004) : ETX Time Out.”
“MTC 系统错误(E004) : 正文结束符(ETX)超时”
E640005 “MTC SYSTEM ERROR (E005) : Sync Character Time Out.”
“MTC 系统错误(E005) : 同步字符超时”
E640006 “MTC SYSTEM ERROR (E006) : Response Time Out.”
“MTC 系统错误(E006) : 应答超时”
E640007 “MTC SYSTEM ERROR (E007) : Data Error.”
“MTC 系统错误(E007) : 数据错误”
E640008 “MTC SYSTEM ERROR (E008) : Receiving Invalid Response.”
“MTC 系统错误(E008) : 接收无效应答”
E640009 “MTC SYSTEM ERROR (E009) : MTC is Off-line.”
“MTC 系统错误(E009) : MTC 处于脱机状态”
E640012 “MTC SYSTEM ERROR (E012) : Unlocking Stacker.”
“MTC 系统错误(E012) : 没有锁定托盘存储箱”
E640013 “MTC SYSTEM ERROR (E013) : Vacuum Error (Head).”
“MTC 系统错误(E013) : 吸取发生错误(Head)”
E640014 “MTC SYSTEM ERROR (E014) : Vacuum Error (Shuttle)”
“MTC 系统错误(E014) : 吸取发生错误(滑梭)”
E640015 “MTC SYSTEM ERROR (E015) : Unable to Recovery Component.”
“MTC 系统错误(E015) : 不能回收组件”
E640017 “MTC SYSTEM ERROR (E017) : Not Finding Tray.”
“MTC 系统错误(E017) : 没有发现托盘”
E640018 “MTC SYSTEM ERROR (E018) : Cover Open.”
“MTC 系统错误(E018) : 机箱盖被打开”
E640023 “MTC SYSTEM ERROR (E023) : Conveyor Error (Head).”
“MTC 系统错误(E023) : 搬运发生错误(Head)”
E640024 “MTC SYSTEM ERROR (E024) : Conveyor Error (Shuttle).”
“MTC 系统错误(E024) : 搬运发生错误(滑梭)”
E640025 “MTC SYSTEM ERROR (E025) : MTC is Supply.”
“MTC 系统错误(E025) : MTC 处于补充状态”
E640027 “MTC SYSTEM ERROR (E027) : No Stacker.”
“MTC 系统错误(E027) : 没有发现托盘存储箱”
E640028 “MTC SYSTEM ERROR (E028) : Door Open.”
“MTC 系统错误(E028) : 机箱门被打开”
E640029 “MTC SYSTEM ERROR (E029) : Remaining Parts.”
“MTC 系统错误(E029) : 组件残留”
E640034 “MTC SYSTEM ERROR (E034) : BGA Holder Error.”
“MTC 系统错误(E034) : BGA 固定器发生错误”
E640035 “MTC SYSTEM ERROR (E035) : Detecting Board on the Conveyor.”
“MTC 系统错误(E035) : 传送轨道上存在基板”
E640039 “MTC SYSTEM ERROR (E039) :| Receiving Parts Taking Completion when Shuttle Conveying.”
“MTC 系统错误(E039) : 滑梭搬运时，接收到吸取结束指令”
E640043 “MTC SYSTEM ERROR (E043) : Head Vacuum No.1 Sensor.”
“MTC 系统错误(E043) : Head No.1 的真空传感器异常”
E640044 “MTC SYSTEM ERROR (E044) : Shuttle Vacuum No.1 Sensor.”
“MTC 系统错误(E044) : 滑梭 No.1 的真空传感器异常”
E640045 “MTC SYSTEM ERROR (E045) : Failed to detect Origin Auto PWB Conveyor.”
“MTC 系统错误(E045) : 未查出自动调整基板宽度的原点”
E640047 “MTC SYSTEM ERROR (E047) : Not Lighting SPOT.”
“MTC 系统错误(E047) : 没有打开照明灯”
E640048 “MTC SYSTEM ERROR (E048) : MS Data Not Complete Yet.”
“MTC 系统错误(E048) : 未输入 MS 参数”
E640053 “MTC SYSTEM ERROR (E053) : Head Vacuum No.2 Sensor.”
“MTC 系统错误(E053) : Head No.2 真空传感器异常”
E640054 “MTC SYSTEM ERROR (E054) : Shuttle Vacuum No.2 Sensor.”
“MTC 系统错误(E054) : 滑梭 No.2 真空传感器异常”
E640055 “MTC SYSTEM ERROR (E055) : Detecting Motor Error Auto PWB conveyor.”
“MTC 系统错误(E055) : 检测到自动调整基板宽度失调”