JUKI贴片机错误代码.pdf - 第239页
E614033 “ ATC X coordinat e is abnormal. (L4-head) ” “ X 坐标参数不正确。 (L4 Head) “ E615033 “ ATC X coordinat e is abnormal. (R1-head) ” “ X 坐标参数不正确。 (R1 Head) “ E616033 “ ATC X coordinat e is abnormal. (R2-head) ” “ X 坐标参数不正确…
E615030 “Nozzles can not be detected. (R1-head)”
“ 没有发现吸嘴。(R1 Head) “
E616030 “Nozzles can not be detected. (R2-head)”
“ 没有发现吸嘴。(R2 Head) “
E617030 “Nozzles can not be detected. (R3-head)”
“ 没有发现吸嘴。(R3 Head) “
E618030 “Nozzles can not be detected. (R4-head)”
“ 没有发现吸嘴。(R4 Head) “
E611032 “The L1-head is not set to use.”
“ Head 处于不使用状态。(L1 Head) “
E612032 “The L2-head is not set to use.”
“ Head 处于不使用状态。(L2 Head) “
E613032 “The L3-head is not set to use.”
“ Head 处于不使用状态。(L3 Head) “
E614032 “The L4-head is not set to use.”
“ Head 处于不使用状态。(L4 Head) “
E615032 “The R1-head is not set to use.”
“ Head 处于不使用状态。(R1 Head) “
E616032 “The R2-head is not set to use.”
“ Head 处于不使用状态。(R2 Head) “
E617032 “The R3-head is not set to use.”
“ Head 处于不使用状态。(R3 Head) “
E618032 “The R4-head is not set to use.”
“ Head 处于不使用状态。(R4 Head) “
E611033 “ATC X coordinate is abnormal. (L1-head)”
“ X 坐标参数不正确。(L1 Head) “
E612033 “ATC X coordinate is abnormal. (L2-head)”
“ X 坐标参数不正确。(L2 Head) “
E613033 “ATC X coordinate is abnormal. (L3-head)”
“ X 坐标参数不正确。(L3 Head) “
E614033 “ATC X coordinate is abnormal. (L4-head)”
“ X 坐标参数不正确。(L4 Head) “
E615033 “ATC X coordinate is abnormal. (R1-head)”
“ X 坐标参数不正确。(R1 Head) “
E616033 “ATC X coordinate is abnormal. (R2-head)”
“ X 坐标参数不正确。(R2 Head) “
E617033 “ATC X coordinate is abnormal. (R3-head)”
“ X 坐标参数不正确。(R3 Head) “
E618033 “ATC X coordinate is abnormal. (R4-head)”
“ X 坐标参数不正确。(R4 Head) “
E611034 “ATC Y coordinate is abnormal. (L1-head)”
“ Y 坐标参数不正确。(L1 Head) “
E612034 “ATC Y coordinate is abnormal. (L2-head)”
“ Y 坐标参数不正确。(L2 Head) “
E613034 “ATC Y coordinate is abnormal. (L3-head)”
“ Y 坐标参数不正确。(L3 Head) “
E614034 “ATC Y coordinate is abnormal. (L4-head)”
“ Y 坐标参数不正确。(L4 Head) “
E615034 “ATC Y coordinate is abnormal. (R1-head)”
“ Y 坐标参数不正确。(R1 Head) “
E616034 “ATC Y coordinate is abnormal. (R2-head)”
“ Y 坐标参数不正确。(R2 Head) “
E617034 “ATC Y coordinate is abnormal. (R3-head)”
“ Y 坐标参数不正确。(R3 Head) “
E618034 “ATC Y coordinate is abnormal. (R4-head)”
“ Y 坐标参数不正确。(R4 Head) “
E611037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (L1-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(L1 Head) “
E612037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (L2-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(L2 Head) “
E613037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (L3-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(L3 Head) “
E614037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (L4-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(L4 Head) “
E615037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (R1-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(R1 Head) “
E616037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (R2-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(R2 Head) “
E617037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (R3-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(R3 Head) “
E618037 “The nozzle is too long. (over 0.6mm)|Please check the nozzle installation status. (R4-head)”
“ 吸嘴过长。(超过 0.6mm)|请检查吸嘴安装状态。(R4 Head) “
E611038 “The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (L1-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(L1 Head) “
E612038 “The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (L2-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(L2 Head) “
E613038 “The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (L3-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(L3 Head) “
E614038 “The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (L4-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(L4 Head) “
E615038 “The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (R1-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(R1 Head) “
E616038”The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (R2-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(R2 Head) “
E617038”The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (R3-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(R3 Head) “
E618038 “The nozzle is too long. (over 0.3mm)|Please check the nozzle installation status. (R4-head)”
“ 吸嘴过长。(超过 0.3mm)|请检查吸嘴安装状态。(R4 Head) “
E611042 “A shadow is detected while nozzle detection after returning nozzles. (L1-head)”
“ 放回吸嘴后，检查吸嘴是否存在时发现阴影。(L1 Head) “