JUKI贴片机错误代码.pdf - 第90页
The nozzle could not be returned t o ATC since something, such a s a component, was on t he nozzle. [Treatment] Please remove the component off the head manually. I399311 “ Set online for MTC ” “ 请连接 MTC 。 ” [Cause] Fail…
The axis can not move until Home returning has been complete.
[Treatment]
Please press the ORIGIN switch to perform Home returning.
W399112 “Servo is in the free state”
“伺服处于未使用状态。”
[Cause]
The axis could not move since the servo is in the free status.
[Treatment]
In order to move the axis, please press the Servo Free switch to lock the servo.
Q399201 “Do you continue reset I/O?”
“%s|是否继续设置?”
[Cause]
1): An error occurred in the safety direction setting (of the objective unit).
2): The unit that had the error
3): The action of the error
[Treatment]
“YES” button will resume the safety direction setting.
“NO” button will abort the safety direction setting.
Q399211 “Cannot return component of %s. | Trash component?”
“不能归还%s 的组件。|是否废弃组件?”
[Cause]
The nozzle could not be returned to ATC since something, such as a component, is on the nozzle. The
nozzle has to be returned in order to return the nozzle to ATC. However, the original position of the
component is not clear. You are asked if to dispose the component.
[Treatment]
“YES” button will dispose the component to the disposal position.
“NO” button will move the head to the waiting position for nozzle removal, and request for a
manual component removal
Q399212 “Is a nozzle returned manually ?|If 'no' is chosen, a nozzle will be returned automatically.”
“是否手动放回吸嘴？，|若选择[否]，则自动放回吸嘴。”
Q399213 “%s descends. Is there feeder etc. below the head ?”
“%s 下降。|Head 下面有没有送料器等物品?”
I399301 “Remove the component from %s”
“请取下%s 的组件。”
[Cause]
The nozzle could not be returned to ATC since something, such as a component, was on the nozzle.
[Treatment]
Please remove the component off the head manually.
I399311 “Set online for MTC”
“请连接 MTC。”
[Cause]
Failed to set the safety direction for MTC since MTC was not online.
[Treatment]
Please make MTC online.
I399312 “Set online for MTS”
“请连接 MTS。”
[Cause]
MTS was not online.
[Treatment]
Please make MTS online.
I399313 “Remove a unknown thing on nozzle.”
“请取下吸嘴上面的不详物。”
I399314 “%s is equipped with the nozzle of an exchange error.|Please check the wearing state of a nozzle.|It
moves to a part protection stop position by [O.K.] selection.”
“ %s 的吸嘴发生交换错误， 请检查吸嘴的安装状态。”
I399315 “Please check the wearing state of a nozzle.”
“ 请检查吸嘴的安装状态。”
I399316 “Remove the nozzle from %s.”
“请取下%s 的吸嘴。”
第四章 选择生产
[选择生产、生产桌面、生产调度程序、重试列表、X Y 自动装置、激光]
E500001 “Window create error(%s)”
“建立窗口错误(%s)”
[Cause]
Failed to create a window.
建立 Window 失败。
The name of the window that you failed to create.
建立失败的 Window 名。
[Treatment]
There is a possibility that enough working space is not being saved. Please add some more memory
available.
可能内存不足。请增加可用内存。
E500002 “There is no memory enough <%s>“
“文件 I/O 错误<%s>“
[Cause]
An error occurred while reading the data from or writing the date in the file.
读写文件发生错误。
1): An action that is a cause of the error
1): 发生错误动作
Memory: Getting the production program storage memory
Memory ：生产程序贮存内存
Read File: Reading the production program in.
Read File ：读取生产程序
Write File: Writing into the production program.
Write File ：写入生产程序
Lock File: A lock for the file.
LockFile ：对文件的锁定
Free Memory Releasing the production program storage memory.
Free Memory ：释放生产程序贮存内存
2): Error code 错误代码
9008 : File open error打开文件错误
9009 : File close error关闭文件错误
9010 : File reading error读文件错误
9014 : The file can not be found. 没有发现文件
9020 : Memory saving error内存确保错误
9021 : Memory releasing error内存释放错误
9028 : File in-use error文件使用错误
9029 : File type error文件类型错误
9030 : Parameter error参数错误
[Treatment]
This is a program error. Please make a note of the cause of the error and the error code, then contact
our technical service Dept. for information.
程序错误。请记好括号内的发生动作、错误代码，并与代理店或本公司技朮服务部联系。