JUKI贴片机错误代码.pdf - 第299页

E631502 “ Component matching teaching error: Other Failures ” “ 组件示教结 果代码 : 取其它特征时失败 “ E631999 “ The recognit ion error which ca nnot be assigned has occurred .” “ 发生不能分配的识别错误 “ E632000 “ LSC Command Handshake Error .” “…

100%1 / 464
E631223 “Terminal component error: Cannot detect a lead (Right side).”
“ 端子组件识别错误:没有引脚（右面） “
E631224 “Terminal component error: Wrong lead width (Up side)”
“ 端子组件识别错误:引脚宽度异常（上面） “
E631225 “Terminal component error: Wrong lead width (Bottom side)”
“ 端子组件识别错误:引脚宽度异常（下面） “
E631226 “Terminal component error: Wrong lead width (Left side)”
“端子组件识别错误:引脚宽度异常（左面） “
E631227 “Terminal component error: Wrong lead width (Right side)”
“端子组件识别错误:引脚宽度异常（右面） “
E631228 “Terminal component error: Component detection error”
“端子组件识别错误:测量组件异常 “
E631229 “Terminal component error: Wrong direction”
“端子组件识别错误:组件方向错误 “
E631230 “Terminal component error: Component size is wrong.”
“端子组件识别错误:组件尺寸错误 “
E631240 “All head vision recognize error: Component touches the window frame.”
“ 全部 Head 的组件识别错误:组件处于检测框边缘 “
E631300 “SOT orientation inspection error: SOT inspect unit is dirty.”
“ SOT 方向错误:检查台被弄脏 “
E631301 “SOT orientation inspection error: The range of brightness is too narrow.”
“ SOT 方向错误:亮度等级不明显 “
E631302 “SOT orientation inspection error: The orientation of component is upside down.”
“ SOT 方向错误:方向差 180 度 “
E631303 “SOT orientation inspection error: The orientation of component is different.”
“ SOT 方向错误:方向不同 “
E631500 “Component matching teaching error: Cannot find a characteristic feature.”
“组件示教结果代码:没发现特征 “
E631501 “ Component matching teaching error: Outline trace error”
“ 组件示教结果代码:没发现轮廓 “
E631502 “ Component matching teaching error: Other Failures”
“ 组件示教结果代码:取其它特征时失败 “
E631999 “The recognition error which cannot be assigned has occurred.”
“ 发生不能分配的识别错误 “
E632000 “LSC Command Handshake Error.”
“ 通讯错误: 连接 LSC 命令错误 “
E632001 “LSC Responce Handshake Error.”
“ 通讯错误: LSC 响应错误 “
E632002 “LSC Undefined Command Request.”
“ 使用未定义的 LSC 命令 “
E632003 “LSC Image Caputure Timeout.”
“ 取得 LSC 图像数据时发生超时 “
E632004 “LSC Operation Error(No Image).”
“ LSC 操作失败(没有图像) “
E632005 “LSC Image Mode(GrayScale/Binaly) is not Correct.”
“ LSC 图像类型错误（多值/2 值）”
E632006 “LSC Undefined Window ID Request.”
“ 未定义的窗口 “
E632020 “LSC Para Count is invalid.”
“ LSC 同时识别次数与设置值不一样 “
E632021 “LSC Nouse Sequence No.”
“ LSC 识别顺序号错误 “
E632022 “LSC Undefined Sequence No.”
“ 未定义的 LSC 识别顺序号”
E632023 “LSC Vision Control Semaphore Wait Timeout.”
“ 要获得图像控制信号时失败（发生超时） “
E632099 “LSC Undefined Error Happened.”
“ 发生其它未定义错误 “
E633000 “LSC Primitive Error:Sensor Status Error.”
“ LSC 错误：传感器状态错误 “
E633001 “LSC Primitive Error:Command Syntax Error.”
“ LSC 错误：命令语法错误 “
E633002 “LSC Primitive Error:Illegal Command.”
“ LSC 错误：执行未定义的命令 “
E633003 “LSC Primitive Error:Command Parameter Error.”
“ LSC 错误：命令参数错误 “
E633004 “LSC Primitive Error:Command Parameter out of range.”
“ LSC 错误：参数超过设置范围”
E633005 “LSC Primitive Error:Window Overlap.”
“ LSC 错误：窗口重迭 “
E633006 “LSC Primitive Error:Undefined Window.”
“ LSC 错误：执行未定义的窗口 “
E633007 “LSC Primitive Error:Active Window count limit exceeded(>16).”
“ LSC 错误：活动窗口过多（大于 16） “
E633008 “LSC Primitive Error:Operation cannot be performed.”
“ LSC 错误：此命令无效 “
E633009 “LSC Primitive Error:Window not active.”
“ LSC 错误：无效的窗口 “
E633010 “LSC Primitive Error:Parameter missing.”
“ LSC 错误：参数个数有错 “
E633011 “LSC Primitive Error:Bad Check Summ.”
“ LSC 错误：LSC 通讯 Check Summ 错误 “
E633012 “LSC Primitive Error:Command not implemented.”
“ LSC 错误：执行没有安装的命令 “
E640000 “MTC SYSTEM ERROR (E000) : Command Error.”
“MTC 系统错误(E000) : 指令错误”
E640001 “MTC SYSTEM ERROR (E001) : Parameter Error.”
“MTC 系统错误(E001) : 参数错误”
E640002 “MTC SYSTEM ERROR (E002) : Empty Parts.”
“MTC 系统错误(E002) : 无组件”