JUKI贴片机错误代码.pdf - 第165页
E602317 “ Axi s Driver:| XR-axis can not move.| Feeder float detected .” “ XR 轴不能移动。 | 发现传送带浮动。 ” E602418 “ Axis Driver:| YC-axis error.|Mach ine detected PWB interference with the check cyl inder .” “ YC 轴错误。 | 因基板检查传 感…
E602114 “Axis Driver:| X-axis error.|Driver alarm.”
“X 轴错误。|驱动警报。”
E602214 “Axis Driver:| Y-axis error.|Driver alarm.”
“Y 轴错误。|驱动警报。”
E602314 “Axis Driver:| XR-axis error.|Driver alarm.”
“XR 轴错误。|驱动警报。”
E602414 “Axis Driver:| YC-axis error.|Driver alarm.”
“YC 轴错误。|驱动警报。”
E602514 “Axis Driver:| YR-axis error.|Driver alarm.”
“YR 轴错误。|驱动警报。”
E602115 “Axis Driver:| X-axis error.|Amp disabled.”
“X 轴错误。|Amp 被中断。”
E602215 “Axis Driver:| Y-axis error.|Amp disabled.”
“Y 轴错误。|Amp 被中断。”
E602315 “Axis Driver:| XR-axis error.|Amp disabled.”
“XR 轴错误。|Amp 被中断。”
E602415 “Axis Driver:| YC-axis error.|Amp disabled.”
“YC 轴错误。|Amp 被中断。”
E602515 “Axis Driver:| YR-axis error.|Amp disabled.”
“YR 轴错误。|Amp 被中断。”
E602116 “Axis Driver:| X-axis error.|Position of Z-axis is low.”
“X 轴错误。|因 Z 轴下降，不能运转。”
E602216 “Axis Driver:| Y-axis error.|Position of Z-axis is low.”
“Y 轴错误。|因 Z 轴下降，不能运转。”
E602316 “Axis Driver:| XR-axis error.|Position of Z-axis is low.”
“XR 轴错误。|因 Z 轴下降，不能运转。”
E602117 “Axis Driver:| X-axis can not move.| Feeder float detected.”
“X 轴不能移动。|发现传送带浮动。”
E602217 “Axis Driver:| Y-axis can not move.| Feeder float detected.”
“Y 轴不能移动。|发现传送带浮动。”
E602317 “Axis Driver:| XR-axis can not move.| Feeder float detected.”
“XR 轴不能移动。|发现传送带浮动。”
E602418 “Axis Driver:| YC-axis error.|Machine detected PWB interference with the check cylinder.”
“YC 轴错误。|因基板检查传感器干扰，不能运转。”
E602120 “Axis Driver:| X-axis gain setting failed.”
“X 轴错误:设置增值参数失败。”
E602220 “Axis Driver:| Y-axis gain setting failed.”
“Y 轴错误:设置增值参数失败。”
E602320 “Axis Driver:| XR-axis gain setting failed.”
“XR 轴错误:设置增值参数失败。”
E602420 “Axis Driver:| YC-axis gain setting failed.”
“YC 轴错误:设置增值参数失败。”
E602520 “Axis Driver:| YR-axis gain setting failed.”
“YR 轴错误:设置增值参数失败。”
E602122 “Axis Driver:| X-axis Originating Capture failed.”
“X 轴错误:原点传感器失效。”
E602222 “Axis Driver:| Y-axis Originating Capture failed.”
“Y 轴错误:原点传感器失效。”
E602130 “Axis Driver:| XMP error occurred on X-axis.”
“X 轴错误: XMP 错误。”
E602230 “Axis Driver:| XMP error occurred on Y-axis.”
“Y 轴错误: XMP 错误。”
E602330 “Axis Driver:| XMP error occurred on XR-axis.”
“XR 轴错误: XMP 错误。”
E602430 “Axis Driver:| XMP error occurred on YC-axis.”
“YC 轴错误: XMP 错误。”
E602530 “Axis Driver:| XMP error occurred on YR-axis.”
“YR 轴错误: XMP 错误。”
E602131 “Axis Driver:| X-axis status error.”
“X 轴错误: 状态错误。”
E602231 “Axis Driver:| Y-axis status error.”
“Y 轴错误: 状态错误。”
E602331 “Axis Driver:| XR-axis status error.”
“XR 轴错误: 状态错误。”
E602431 “Axis Driver:| YC-axis status error.”
“YC 轴错误: 状态错误。”
E602531 “Axis Driver:| YR-axis status error.”
“YR 轴错误: 状态错误。”
E602132 “Axis Driver:| X-axis failed motion start.”
“X 轴错误: 启动失败。”
E602232 “Axis Driver:| Y-axis failed motion start.”
“Y 轴错误: 启动失败。”
E602332 “Axis Driver:| XR-axis failed motion start.”
“XR 轴错误: 启动失败。”
E602432 “Axis Driver:| YC-axis failed motion start.”
“YC 轴错误: 启动失败。”
E602532 “Axis Driver:| YR-axis failed motion start.”
“YR 轴错误: 启动失败。”
E602133 “Axis Driver:| X-axis failed motion stop.”
“X 轴错误: 停止失败。”
E602233 “Axis Driver:| Y-axis failed motion stop.”
“Y 轴错误: 停止失败。”
E602333 “Axis Driver:| XR-axis failed motion stop.”
“XR 轴错误: 停止失败。”
E602433 “Axis Driver:| YC-axis failed motion stop.”
“YC 轴错误: 停止失败。”
E602533 “Axis Driver:| YR-axis failed motion stop.”
“YR 轴错误: 停止失败。”
E602136 “Axis Driver:| X-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“X 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”