JUKI贴片机错误代码.pdf - 第422页
Retr ieve a database listing cal l for a name of a part not pres ent on the program edi ting. E3057 “ This component name <% s> already exi sts. “ " 该组件名已存在。 " E3058 “ This adhesive patten name <%s>…
Appears if cutting is selected for each screen.
E3047 “Optimization failed. “
"优化失败。"
E3048 “Optimization was interrupted. “
"优化被终止。"
E3049 “Mismatch occured between line configuration and program data. “
"在线外形和程序数据之间不匹配。"
E3050 Program will be terminated.
"将退出编辑程序。"
[Explanation]
Appears if the program editing forced an abnormal ending after starting.
W3051 Dispenser X blow point is out of PWB.
"X 打击点在基板的外部。"
[Explanation]
Appears if the start position for dummy punching deviates from the PWB.
W3052 Dispenser Y blow point is out of PWB.
"Y 打击点在基板的外部"
[Explanation]
Appears if the start position for dummy punching deviates from the PWB.
W3053 Both X and Y dispenser blow count is set to 0, dispenser blow will be disabled. Are you sure?
"X 和 Y 分配的打击数都设置成 0，分配打击将取消，确定吗？"
[Explanation]
Appears if 0 is specified for both the numbers of dummy punching operations, X and Y, and the OK
button is pressed.
W3055 Data is incomplete. Would you like to save?
"数据不完整，要保存吗？"
[Explanation]
Appears if saving incomplete data is tried.
E3056 Same component name is already in component data.
"在组件数据中已有同样的组件名。"
[Cause]
Appears if the name of an existing part within the program editing is requested when retrieving a
database listing.
[Deal]
Retrieve a database listing call for a name of a part not present on the program editing.
E3057 “This component name <%s> already exists. “
"该组件名已存在。"
E3058 “This adhesive patten name <%s> already exists. “
"该粘性图案名 <%s>已经存在。"
E3059 “Adhesive database file cannot be found. “
"找不到粘性数据库文件。"
W3060 “The database structure has been changed. Unless this file is updated. It cannot be handled in this
version. Launch Database, dialogbox will show how to update the database structure. “
"数据库结构已经被改变，文件将更新。在该版本中不能处理，激活数据库，对话框将显
示如何更新数据库结构。"
W3501 “A file already exists.Shall it be overwritten? “
"文件已经存在，要覆盖吗？"
W3502 Data being created will be lost. Is this OK?
"创建的数据将丢失，确定吗?"
[Explanation]
Appears if "New" or "Open" is selected from the File menu when editing data.
W3503 When station is changed, component data and pick data will be deleted. Is this OK?
"当位置被改变，组件数据和挑选数据将被删除，确定吗？"
[Explanation]
Appears if station specification is changed in the mounting data.
W3504 There are no data to be saved.
"没有要保存的数据。"
[Explanation]
Appears if "Save" is selected without editing data.
W3505 “Set tray component to one.Is this OK? “
"设置盘组件，确定？
"
W3506 “<%s> will be registered.Is this OK? “
"<%s>将被注册，确定吗？"
W3507 “Registration of <%s> is in progress. “
"注册<%s>正在进行。"
W3508 <%s> will be called. Is this OK?
"<%s>将被命名，确定吗？"
[Explanation]
Appears if a resource is selected from the database list access.
W3509 “Pick data will become invalid.Is this OK? “
"挑选的数据将无效，确定吗？"
W3510 Select data to be duplicated.
"选择的数据被复制。"
[Explanation]
Appears if "Copy" is selected without no data selected.
W3511 Select one insertion position.
"选择一个插入位置。"
[Explanation]
Appears if "Line Insertion" is selected with more than one line selected.
W3512 Select one of duplicated data.
"选择一个复制数据。"
[Explanation]
Appears if "Line Duplication" is selected with more than one line selected.
W3513 Line of automatically selected data cannot be duplicated.
"自动选择数据线不能被复制."
[Explanation]
Appears if duplicating a line for which automatic station selection is specified.
W3514 Last datum will be deleted. Is this OK?
"最后数据将被删除，确定吗？"
[Explanation]
Appears if inserting or duplicating a line is selected with the maximum amount of data having been
specified for the mounting data.
W3515 “Several succeeding data will be deleted.Is this OK? “
"随后的几个数据将被删除，确定吗？"
W3516 “Some data cannot be created,because the total number is exceeded.Is this OK? “
"因为总数量已被超过，一些数据不能被创建，确定吗？"
E3517 MAX number is exceeded, so data cannot be created.
"最大数量已超过，数据不能被创建。"
[Explanation]