JUKI贴片机错误代码.pdf - 第306页
“ MTC 系统错误 (E117) : 滑梭打开 / 关闭传感器发生错误 ” E640120 “ MTC SYSTEM ERROR (E120) : Drive Time Out (Z Axis) .” “ MTC 系统错误 (E120) : 驱动超时 (Z 轴 ) ” E640121 “ MTC SYSTEM ERROR (E121) : Driver Alarm (X Axis) .” “ MTC 系统错误 (E121) : 驱动警…
E640098 “MTC SYSTEM ERROR (E098) : Door and Cover SW Error.”
“MTC 系统错误(E098) : 机箱门或盖子的开关发生错误”
E640099 “MTC SYSTEM ERROR (E099) : Over Run Error.”
“MTC 系统错误(E099) : 超出范围”
E640100 “MTC SYSTEM ERROR (E100) : Z Axis Sensor Error.”
“MTC 系统错误(E100) : Z 轴传感器发生错误”
E640101 “MTC SYSTEM ERROR (E101) : X Axis Sensor Error.”
“MTC 系统错误(E101) : X 轴传感器发生错误”
E640102 “MTC SYSTEM ERROR (E102) : Y Axis Sensor Error.”
“MTC 系统错误(E102) : Y 轴传感器发生错误”
E640106 “MTC SYSTEM ERROR (E106) : RAM Error.”
“MTC 系统错误(E106) : RAM 错误”
E640107 “MTC SYSTEM ERROR (E107) : Break Current Error.”
“MTC 系统错误(E107) : 制动电流异常”
E640108 “MTC SYSTEM ERROR (E108) : Holder Sensor Error (Y Axis).”
“MTC 系统错误(E108) : 固定传感器发生错误(Y 轴).”
E640109 “MTC SYSTEM ERROR (E109) : Motor Off.”
“MTC 系统错误(E109) : 马达被关闭”
E640110 “MTC SYSTEM ERROR (E110) : Software Limit (Z Axis).”
“MTC 系统错误(E110) : 软件界限(Z 轴)”
E640111 “MTC SYSTEM ERROR (E111) : Software Limit (X Axis).”
“MTC 系统错误(E111) : 软件界限(X 轴)”
E640112 “MTC SYSTEM ERROR (E112) : Software Limit (Y Axis).”
“MTC 系统错误(E112) : 软件界限(Y 轴)”
E640114 “MTC SYSTEM ERROR (E114) : Shuttle Sensor Error.”
“MTC 系统错误(E114) : 滑梭传感器发生错误”
E640116 “MTC SYSTEM ERROR (E116) : NV-RAM Error.”
“MTC 系统错误(E116) : NV-RAM 发生错误”
E640117 “MTC SYSTEM ERROR (E117) : Shutter Close/Open Sensor Error.”
“MTC 系统错误(E117) : 滑梭打开/关闭传感器发生错误”
E640120 “MTC SYSTEM ERROR (E120) : Drive Time Out (Z Axis).”
“MTC 系统错误(E120) : 驱动超时(Z 轴)”
E640121 “MTC SYSTEM ERROR (E121) : Driver Alarm (X Axis).”
“MTC 系统错误(E121) : 驱动警报(X 轴)”
E640122 “MTC SYSTEM ERROR (E122) : Driver Alarm (Y Axis).”
“MTC 系统错误(E122) : 驱动警报(Y 轴)”
E640124 “MTC SYSTEM ERROR (E124) : Driver Alarm (Shuttle).”
“MTC 系统错误(E124) : 驱动警报(滑梭)”
E640127 “MTC SYSTEM ERROR (E127) : Tray Error.”
“MTC 系统错误(E127) : 托盘错误”
E640130 “MTC SYSTEM ERROR (E130) : Position Error (Z Axis).”
“MTC 系统错误(E130) : 位置错误”
E640134 “MTC SYSTEM ERROR (E134) : Changing Shuttle Pad Error.”
“MTC 系统错误(E134) : 更换滑梭垫发生错误”
E640140 “MTC SYSTEM ERROR (E140) : Unable to Change Servo Driver ON (Z Axis).”
“MTC 系统错误(E140) : 不能起动伺服驱动器(Z 轴)”
E640144 “MTC SYSTEM ERROR (E144) : Software Limit (Shuttle).”
“MTC 系统错误(E144) : 软件界限(滑梭)”
E640150 “MTC SYSTEM ERROR (E150) : Servo Alarm.”
“MTC 系统错误(E150) : 伺服警告”
E640164 “MTC SYSTEM ERROR (E164) : Bulb Error.”
“MTC 系统错误(E164) : Bulb 错误”
I640170 “MTC : Drawing Parts Cancel by parts request cancellation.”
“MTC : 取组件的要求，因状态转为取消而被取消”
I640181 “MTC : Drawing Parts Cancel by Switching Off-line.”
“MTC : 取组件的要求，因状态转为脱机而被取消”
I640182 “MTC : Drawing Parts Cancel by Switching Supply.”
“MTC : 取组件的要求，因状态转为补充而被取消”
I640183 “MTC : Drawing Parts Cancel by Pressing MTC Emergency Switch.”
“MTC : 取组件的要求，因状态转为紧急停止而被取消”
I640184 “MTC : Drawing Parts Interrupt by Retry Out.”
“MTC : 取组件的要求，因状态转为重试而被退出”
I640185 “MTC : Drawing Parts Interrupt by Empty Parts.”
“MTC : 取组件的要求，因无组件而被退出”
I640186 “MTC : Drawing Parts Interrupt by Supply.”
“MTC : 取组件的要求，因补充操作中而被退出”
E640202 “MTC COMMUNICATION ERROR : Data Error.”
“MTC 通讯错误 : 数据错误”
E640203 “MTC COMMUNICATION ERROR : Communication Error.”
“MTC 通讯错误 : 通讯错误”
E640204 “MTC COMMUNICATION ERROR : Procedure Error.”
“MTC 通讯错误 : 步骤错误”
E640205 “MTC COMMUNICATION ERROR : Synchronous Error.”
“MTC 通讯错误 : 同步错误”
E640206 “MTC COMMUNICATION ERROR : Power Off.”
“MTC 通讯错误 : 停电错误”
E640207 “MTC DATA ERROR : Step Number of Tray is Wrong.”
“MTC 数据错误 : 托盘阶层号指定错误”
E640208 “MTC ERROR : MTC is not Available in Setup Data.”
“MTC 错误 : MTC没有被设置”
E640209 “MTC DATA ERROR : Not Finding STX, ETX.”
“MTC 数据错误 : 没有发现正文开始符(STX), 结束符(ETX)”
E640210 “MTC DATA ERROR : Undefined Command Code is Specified.”
“MTC 数据错误 : 指定了未定义指令代码”
E640211 “MTC ERROR : Parts Request Send Multiplexy (WAIT).”
“MTC 错误 : 抽出要求被多重发送(WAIT)”
E640212 “MTC ERROR : Parts Request Send Multiplexy (KICK).”