JUKI贴片机错误代码.pdf - 第385页
E693018 “ A system error occurred.|T he machine type is illegal .” “ 发生系统错误。 | 机器类型错误。 ” E693019 “ The abnormali ties of the positi on sensor of il lumination were d etected at the time of the illumination position chang…
E693003 “The specification of OCC is abnormal.”
“OCC的规格错误。”
E693004 “The specification of VCS is abnormal.”
“VCS的规格错误。”
E693005 “The specification of the device is abnormal.”
“设备的规格错误。”
E693006 “The side illumination of standard VCS(R) it does not rise.”
“标准VCS(R)的侧面照明不能上升。”
E693007 “The side illumination of option VCS(R) does not rise.”
“选项VCS(R)的侧面照明不能上升。”
E693008 “The side illumination of standard VCS(L) it does not rise.”
“标准VCS(L)的侧面照明不能上升。”
E693009 “The side illumination of option VCS(L) does not rise.”
“选项VCS(L)的侧面照明不能上升。”
E693010 “The side illumination of standard VCS(R) it does not descend.”
“标准VCS(R)的侧面照明不能下降。”
E693011 “The side illumination of option VCS(R) does not descend.”
“选项VCS(R)的侧面照明不能下降。”
E693012 “The side illumination of standard VCS(L) it does not descend.”
“标准VCS(L)的侧面照明不能下降。”
E693013 “The side illumination of option VCS(L) does not descend.”
“选项VCS(L)的侧面照明不能下降。”
E693014 “The position sensor of the side illumination of standard VCS(R) it is abnormal.”
“标准VCS(R)的侧面照明位置传感器错误。”
E693015 “The position sensor of the side illumination of option VCS(R) is abnormal.”
“选项VCS(R)的侧面照明位置传感器错误。”
E693016 “The position sensor of the side illumination of standard VCS(L) it is abnormal.”
“标准VCS(L)的侧面照明位置传感器错误。”
E693017 “The position sensor of the side illumination of option VCS(L) is abnormal.”
“选项VCS(L)的侧面照明位置传感器错误。”
E693018 “A system error occurred.|The machine type is illegal.”
“发生系统错误。|机器类型错误。”
E693019 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(R).|The sensor of both by the side of a standard and an option
is turned on.”
“ 照明位置切换到VCS（R）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是ON。”
E693020 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(L).|The sensor of both by the side of a standard and an option
is turned on.”
“ 照明位置切换到VCS（L）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是ON。”
E693021 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(R).|The sensor of both by the side of a standard and an option
is turned off.”
“ 照明位置切换到VCS（R）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是OFF。”
E693022 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(L).|The sensor of both by the side of a standard and an option
is turned off.”
“ 照明位置切换到VCS（L）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是OFF。”
E693023 “The position of illumination does not change to standard VCS(R).|The position sensor by the side
of a standard does not turn on.”
“照明位置切换不了标准VCS（R）。|标准侧的位置传感器不是ON。”
E693024 “The position of illumination does not change to option VCS(R).|The position sensor by the side of
a option does not turn on.”
“照明位置切换不了选项VCS（R）。|选项侧的位置传感器不是ON。”
E693025 “The position of illumination does not change to standard VCS (L).|The position sensor by the side
of a standard does not turn on.”
“照明位置切换不了标准VCS（L）。|标准侧的位置传感器不是ON。”
E693026 “The position of illumination does not change to option VCS (L).|The position sensor by the side of
a option does not turn on.”
“照明位置切换不了选项VCS（L）。|选项侧的位置传感器不是ON。”
E694001 “A coplanarity judgemennt error.”
“ 共面检测错误。”
E694002 “A coplanarity centering position error.”
“ 共面检测时的端子位置偏移错误。”
E694003 “A lead count error.”
“ 引脚数错误。”
E694004 “A colinearity judgemennt error.”
“ 平行性判断错误。”
E694005 “A coplanarity measurement error.”
“ 共面检测时测量错误。”
E694006 “The measurement plane is too low.”
“ 共面测量高度过低。”
E694007 “The measurement plane is too high.”
“ 共面测量高度过高。”
E694011 “A coplanarity unit error.”
“ 共面测量单元错误。”
E694012 “A illegal data or illegal operation.”
“ 违规数据或违规操作引起的错误。”
E694013 “A coplanarity adjust error.”
“ 共面校准错误。”
E694014 “A time-out or other error.”
“ 超时或其它错误。”
E694015 “A hardware error of coplanarity controler.”
“ 控制共面的硬件出错。”
E694016 “A measurement software error.”
“ 测量软件有问题。”
E694017 “A lasor diode is abnormal.”
“ 激光超时错误。”
E694018 “A cable connection error.”
“ 传感器电缆连接异常。”