JUKI贴片机错误代码.pdf - 第150页

E512789 “ Thet a8 Axis detect Cordinates outof Lim it Range ” θ 8 轴移动前指定的坐 标，超过移动范围。 ” E512900 “ Axis Motion detect Emergency Switch ” “ 轴移动被紧急停止按钮强行停止。 ” E512901 “ Software IF Logi ck Error detecth ” “ 轴移动时发现软件逻辑错误。 ” E…

100%1 / 464
E512773 “Theta7 Axis detect Servo Driver Alarm|(OverVoltage)”
“θ7 轴移动时伺服驱动警报|(过电压)”
E512774 “Theta7 Axis detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“θ7 轴移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512775 “Theta7 Axis detect Servo Driver Alarm|(OverHeat Error)”
“θ7 轴移动时伺服驱动警报|(过热错误)”
E512776 “Theta7 xis detect Servo Driver Alarm|(Encoder Error or Magnet Scale Error)”
“θ7 轴移动时伺服驱动警报|(译码器异常或 Magnet 刻度错误)”
E512777 “Theta7 Axis detect Servo Driver Alarm|(Commutation Error)”
“θ7 轴移动时伺服驱动警报|(通讯异常)”
E512778 “Theta7 Axis detect Limit Senser”
“θ7 轴移动时界限错误”
E512779 “Theta7 Axis detect Cordinates outof Limit Range”
θ7 轴移动前指定的坐标，超过移动范围。”
E512781 “Theta8 Axis detect Servo Driver Alarm|(OverCurrent)”
“θ8 轴移动时伺服驱动警报|(过电流)”
E512782 “Theta8 Axis detect Servo Driver Alarm|(OverLoad)”
“θ8 轴移动时伺服驱动警报|(过负荷)”
E512783 “Theta8 Axis detect Servo Driver Alarm|(OverVoltage)”
“θ8 轴移动时伺服驱动警报|(过电压)”
E512784 “Theta8 Axis detect Servo Driver Alarm|(Drive Power Source Error or Servo Power OFF)”
“θ8 轴移动时伺服驱动警报|(驱动电源异常或伺服电源被关闭)”
E512785 “Theta8 Axis detect Servo Driver Alarm|(OverHeat Error)”
“θ8 轴移动时伺服驱动警报|(过热错误)”
E512786 “Theta8 Axis detect Servo Driver Alarm|(Encoder Error or Magnet Scale Error)”
“θ8 轴移动时伺服驱动警报|(译码器异常或 Magnet 刻度错误)”
E512787 “Theta8 Axis detect Servo Driver Alarm|(Commutation Error)”
“θ8 轴移动时伺服驱动警报|(通讯异常)”
E512788 “Theta8 Axis detect Limit Senser”
“θ8 轴移动时界限错误”
E512789 “Theta8 Axis detect Cordinates outof Limit Range”
θ8 轴移动前指定的坐标，超过移动范围。”
E512900 “Axis Motion detect Emergency Switch”
“轴移动被紧急停止按钮强行停止。”
E512901 “Software IF Logick Error detecth”
“轴移动时发现软件逻辑错误。”
E512902 “Area Senser detected “
“发现范围错误。”
E512903 “Feeder Flowt Senser detected”
“发现传送带浮动。”
E513001 “MTC abnormal operation was generated.”
“MTC 运转异常。”
E513002 “Parts that MTC is different were drawn out.”
“MTC 抽出不同组件。”
E513003 “Parts were not able to be adsorbed from MTC.”
“不能从 MTC 吸着组件。”
W513401 “The power supply of MTC is turning off.”
“MTC 电源被关闭。”
W513402 “MTC is an emergency stop.”
“MTC 被紧急停止。”
W513403 “MTC is an initialize.”
“MTC 未结束原点返回。”
W513404 “MTC is off-line.”
“MTC 处于脱机状态。”
W513405 “MTC is a door opening.”
“MTC 机箱门被打开。”
W513406 “MTC is a cover opening.”
“MTC 机盖被打开。”
W513407 “MTC is making an error.”
“MTC 处于错误状态。”
W513408 “MTC is exchanging parts.”
“MTC 处于交换组件状态。”
Q513601 “May I abandon MTC parts?”
“是否废弃 MTC 组件？”
I513801 “There are parts on the shuttle.|Please detach parts.”
“滑梭上有组件。|请取下组件。”
I513802 “It is temporary stop by the part protection.|Please detach parts.”
“因保护组件暂停。|请取下组件。”
I513803 “BGA parts cannot be returned.|Please detach parts.”
“不能归还 BGA 组件。|请取下组件。”
E514001 “MTS abnormal operation was generated.”
“MTS 运转异常。”
E514002 “Parts that MTS is different were drawn out.”
“MTS 抽出异样组件。”
W514401 “The power supply of MTC is turning off.”
“MTS 电源被关闭。”
W514402 “MTS is an emergency stop.”
“MTS 被紧急停止。”
W514403 “MTS is an initialize.”
“MTS 未结束原点返回。”
W514404 “MTS is off-line.”
“MTS 处于关闭状态。”
W514405 “MTS is a door opening.”
“MTS 机箱门被打开。”
W514406 “MTS is no stacker.”
“MTS 无堆栈箱。”
W514407 “MTS is making an error.”
“MTS 处于出错状态。”
W514408 “MTS is exchanging parts.”
“MTS 处于交换组件状态。”